User manual ASUS UTILITY SPEED SETUP POSTER

[. . . ] Specifications and information contained in this manual ae furnished for informational use only, and are subject to change at any time without notice, and should not be construed as a commitment by ASUS. ASUS assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual, including the products and software described in it. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. ii Contents Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Event Logs Advanced Monitor Boot Tool Exit Press <Enter> to change the Smbios Event Log configuration. Change Smbios Event Log Settings View Smbios Event Log Change Smbios Event Log Settings Main Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Event Logs Advanced Monitor Boot Tool Exit Change this to enable or disable all features of Smbios Event Logging during boot. Enabling/Disabling Options Smbios Event Log [Enabled] Erasing Settings Erase Event Log When Log is Full [No] [Do Nothing] Smbios Event Log Standard Settings MECI 1 METW 60 Custom Options Log OEM Codes Convert OEM Codes [Enabled] [Disabled] NOTE: All values changed here do not take effect until computer is restarted. Smbios Event Log [Enabled] Allows you to enable or disable all features of Smbios event logging. Configuration option: [Disabled] [Enabled] Erase Event Log [No] Allows you to select the options for erasing Smbios event log. Configuration options: [No] [Yes, Next reset] [Yes, Every reset] When Log is Full [Do Nothing] Allows you to select the options for reaction when the event logs are full. Configuration options: [Do Nothing] [Erase Immediately] MECI [xx] Allows you to adjust value for the MECI (Multiple Event Count Increment), which is the number of occurrences of a duplicate event that must pass before the multiple-event counter associated with log entry is updated. Use the <+> and <-> keys to adjust the value. METW [xx] Allows you to adjust value for the METW (Multiple Event Time Window), which is the number of minutes that must pass between duplicate log entries which utilize a multiple-event counter. Use the <+> and <-> keys to adjust the value. The values range from 0 to 99. ASUS TS100-E7/PI4 4-11 Log OEM Codes [Enabled] Allows you to enable or disable the logging of EFI status codes as OEM codes. Configuration option: [Disabled] [Enabled] Convert OEM Codes [Disabled] Allows you to enable or disable the converting of EFI status codes to standard Smbios types. Configuration options: [Disabled] [Enabled] Enhanced Intel SpeedStep Technology [Enabled] Allows you to enable or disable the Enhanced Intel® SpeedStep Technology (EIST). Configuration options: [Disabled] [Enabled] Turbo Mode [Enabled] This item appears only when you set the Enhanced Intel SpeedStep Technology item to [Enabled] and allows you to enable or disable the Intel® Turbo Mode Technology. Configuration options: [Disabled] [Enabled] CPU C1E [Enabled] [Enabled] [Disabled] Enables the C1E support function. This item should be enabled in order to enable the Enhanced Halt State. Disables this function. CPU C3 Report [Enabled] CPU C6 Report [Enabled] Allows you to disable or enable the CPU C3 report to OS. Allows you to disable or enable the CPU C6 report to OS. Package C State limit [No Limit] Allows you to set the Package C state limit. Configuration options: [C0] [C1] [C6] [No Limit] 4-16 Chapter 4: BIOS setup 4. 5. 5 North Bridge Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc. Advanced The North Bridge is built in the CPU. Memory Information TOTAL Memory DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 Low MMIO Align DMI Gen2 VT-d Initate Graphic Adapter 1024 MB 0 MB (DDR3 1024 MB (DDR3 0 MB (DDR3 0 MB (DDR3 [64M] [Enabled] [Disabled] [PEG/PCI] 1333) 1333) 1333) 1333) Low MMIO resources align at 64MB/1024MB Low MMIO Align [64M] Allows you to select the options for the Low MMIO Align. Configuration options: [64M] [1024M] DMI Gen2 [Enabled] Allows you to enable or disable the DMI Gen2. Configuration options: [Disabled] [Enabled] VT-d [Disabled] Allows you to enable or disable the VT-d. Configuration options: [Disabled] [Enabled] Initiate Graphic Adapter [PEG/PCI] Allows you to decide which graphics controller to use as the primary boot device. [. . . ] Click the Hardware tab, and then click the Device Manager button. The screen differs based on the controller. 4. 6. Right-click the RAID controller driver item, and then select Properties from the menu. Click the Driver tab, and then click the Driver Details button to display the RAID controller drivers. Click OK when finished. ASUS TS100-E7/PI4 6-7 6. 2 Intel® chipset device software installation This section provides the instructions on how to install the Intel® chipset device software on the system. [. . . ]