Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ASUS V-SERIES M2V890. We hope that this ASUS V-SERIES M2V890 user guide will be useful to you.
Lastmanuals help download the user guide ASUS V-SERIES M2V890.
Detailed instructions for use are in the User's Guide.
[. . . ] Use this switch to select the appropriate system input voltage according to the voltage supply in your area. If the voltage supply in your area is 100-127 V, set the switch to 115 V. If the voltage supply in your area is 200-240 V, set the switch to 230 V.
eSATA
Quick installation guide
3
Removing the side cover and front panel assembly
1. [. . . ] A clicking sound denotes that the retention bracket is in place. Push down the retention bracket lock on the retention mechanism to secure the heatsink and fan to the module base. When the fan and heatsink assembly is in place, connect the CPU fan cable to the connector on the motherboard labeled CPU_FAN.
CPU Fan CPU Heatsink Retention bracket Retention bracket lock Retention Module Base
1
2
3
4
5
Quick installation guide
5
Installing a DIMM
1. Locate the DIMM sockets in the motherboard. Unlock a DIMM socket by pressing the retaining clips outward. Align a DIMM on the socket such that the notch on the DIMM matches the break on the socket. Push the DIMM to the socket until the retaining clips snap inward.
· Unplug the power supply before adding or removing DIMMs. Failure to do so may cause damage to the motherboard and/or components. A DDR2 DIMM is keyed with a notch so that it fits in only one direction. Do not force a DIMM into a socket to avoid damaging the DIMM.
·
Installing an expansion card
1. Remove the metal cover opposite the slot that you intend to use.
2
1
3. 4.
Insert the card connector to the slot, then press the card firmly until it fits in place. Replace the metal bracket lock.
4 3
6
Quick installation guide
Installing storage drives
Optical drive
1. Place the chassis upright, then remove the upper 5. 25" drive bay metal plate cover. Insert the optical drive to the bay, then carefully push the drive until its screw holes align with the holes on the bay. Secure the optical drive with two screws on both sides of the bay. Connect the IDE (A) and power (B) plugs to connectors at the back of the drive.
B A
2
3
3
3. Place the chassis upright, then remove the lower 3. 5" drive bay metal plate cover. [. . . ] Insert the front panel assembly hinge-like tabs to the holes on the right side of the chassis. Swing the front panel assembly to the left, then insert the hooks to the chassis until the front panel assembly fits in place. Insert the side cover hooks to the chassis top and bottom holes. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ASUS V-SERIES M2V890
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ASUS V-SERIES M2V890 will begin.
