User manual ASUS V3000SE

[. . . ] R V3000 Series AGP&PCI Graphics Cards USER'S MANUAL Hardware & Video Drivers AGP-V3000/TV AGP-V3000 3DP-V3000/TV 3DP-V3000 AGP-V3000ZX/TV/4M AGP-V3000ZX/4M AGP-V3000ZX/TV AGP-V3000ZX USER'S NOTICE No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. [. . . ] Restart your computer -- the ASUS V3000 Series graphics card should be automatically detected and the display drivers automatically updated. ASUS V3000 Series User's Manual III. Windows 95/98 Operating System Requirements IMPORTANT!This card requires its own IRQ to work normally. If you have problems during installation, please check your BIOS setting or motherboard jumpers to make sure that "VGA INT/IRQ" has been enabled. Windows 95 To take advantage of all the AGP features, you must use Windows 95 OSR2. 0, install the USB upgrade and then install the VGARTD driver for the corresponding chipset on your motherboard. Windows 95/98 "Install VGARTD"). Note: This is not necessary for the 3DP-V3000/TV. To install Win95 OSR2. 0 with USB, you must have OSR2. 0 installed already. Otherwise, first install OSR2. 0 and then use the USB support update (you must use the same update language of your Windows language). On the April 1997 MSDN Disc1 "Windows 95, SDKs, and Tools", OSR2. 0 is found in "\OSR2" while the USB support update is found in "\OSR2\USBSUPP". To determine the installed version of the operating system, look in the registry at: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Version HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\VersionNumber OSR2. 0 with USB has: Version "Windows 95" and VersionNumber "4. 03. 1212" or "4. 03. 1214". Windows 98 Only Windows 98 Beta3 or later supports full Direct3D and AGP features. If you are not using Beta3 or later, you must upgrade your Windows before installing the AGP display driver. NOTE: Windows 98 includes VGARTD for the major chipsets but it is recommended that you install VGARTD from the V3000 Series installation CD to make sure that you have the latest version of VGARTD. NOTE: This Manual assumes that your CD-ROM disc drive is drive D: and that MS Windows is in "c:\windows". Replace either with the actual location, if necessary. ASUS V3000 Series User's Manual 15 III. Windows 95/98 Install V3000 Series Driver (existing ASUS V3000) Follow the steps below if you are using a V3000 Series graphics card with AGP bus or if you want to install it in Windows 98. Note: "New hardware found" refers to the prompt for drivers when installing Windows 95/98 with the ASUS V3000 Series VGA card already installed. This Manual assumes that your CD-ROM disc drive is drive D: and that Windows 95/98 is in C:\windows. Replace either with the actual location, if necessary. When installing Windows 95/98, a New Hardware Found window will appear: III. Windows 95/98 Install Driver Select Do not install a driver and go to step 3. When installing Windows 95 OSR 2. 0, the Update Device Driver Wizard window will appear: This wizard will complete the installation of the Standard PCI Graphics Adapter (VGA). Click Next > to let Windows search for an updated driver. The system will hang if you click Cancel! [. . . ] When all files are copied, go back to the Display Properties box by clicking Close. The System Settings Change dialog box is displayed. Windows NT will restart with the default settings. The Display applet will appear to allow for mode selection. ASUS V3000 Series User's Manual V. [. . . ]