User manual ASUS VINTAGE-AH1L

[. . . ] Vintage-AH1 Barebone System E2139 First Edition August 2005 Copyright © 2005 ASUSTeK COMPUTER INC. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. [. . . ] Do not place jumper caps on the fan connectors!CPU_FAN Rotation +12V GND CHA_FAN ® Fan connectors ASUS Vintage-AH1 4-7 GND RSATA_RXN1 RSATA_RXP1 GND RSATA_TXN1 RSATA_TXP1 GND GND +12V Rotation 5. USB connectors (10-1 pin USB56, USB78) These connectors are for USB 2. 0 ports. Connect the USB/GAME module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2. 0 specification that supports up to 480 Mbps connection speed. ® USB78 USB+5V USB_P7USB_P7+ GND USB+5V USB_P8USB_P8+ GND NC USB56 USB+5V USB_P5USB_P5+ GND 1 1 USB 2. 0 connectors Never connect a 1394 cable to the USB connectors. The USB module is purchased separately. 6. ATX power connectors (24-pin ATXPWR, 4-pin ATX12V) These connectors are for ATX power supply plugs. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. ATXPWR +3 Volts +12 Volts +12 Volts ATX12V +5V Standby GND GND +12V DC +12V DC Power OK Ground +5 Volts Ground +5 Volts Ground +3 Volts +3 Volts Ground +5 Volts +5 Volts +5 Volts -5 Volts Ground Ground Ground PSON# Ground -12 Volts +3 Volts ® ATX power connector 4-8 Chapter 4: Motherboard info USB+5V USB_P6USB_P6+ GND NC 7. Optical drive audio connector (4-pin CD) This connector is for the 4-pin audio cable that connects to the audio connector at the back of the optical drive. CD (black) Left Audio Channel Ground Ground Right Audio Channel AUD_GND AUD_VCC AUD_RET_R ® Internal audio connector Enable the CD-IN function in the audio utility when using this connector. 8. Front panel audio connector (10-1 pin FP_AUDIO) This connector is for a chassis-mounted front panel audio I/O module that supports AC'97 audio standard. FP_AUDIO ® 1 AUD_MIC1 AUD_MIC2 AUD_FPOUT_R AUD_MIC_JD AUD_FPOUT_L Front panel audio connector ASUS Vintage-AH1 AUD_RET_L 4-9 1 0 . GAME/MIDI port connector (16-1 pin GAME) This connector is for a GAME/MIDI port. Connect the USB/GAME module cable to this connector, then install the module to a slot opening at the back of the system chassis. The GAME/MIDI port connects a joystick or game pad for playing games, and MIDI devices for playing or editing audio files. ® GAME Game connector +5V J1B1 J1CX GND GND J1CY J1B2 +5V 1 1 . Digital audio connector (4-1 pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). Connect the S/PDIF module cable to this connector, then install the module to a slot opening at the back of the system chassis. The S/PDIF module is purchased separately. SPDIF_OUT SPDIFOUT GND ® Digital audio connector 4-10 +5V Chapter 4: Motherboard info +5V J2B1 J2CX MIDI_OUT J2CY J2B2 MIDI_IN 1 2 . IEEE 1394 connectors (10-1 pin IE1394B_1, IE1394B_2 [Purple]) These connectors are for IEEE 1394b ports. Connect the IEEE 1394 module cable to this connector, then install the module to a slot opening at the back of the system chassis. ® IE1394_1 IEEE 1394 connector 1 Never connect a U S B c a b l e to the IEEE 1394b connectors. Doing so will damage the motherboard! 1 3 . System front panel connector (10-1 pin F_PANEL1) This connector supports several front panel chassis-mounted functions. PWRSW PWR GND ® F_PANEL1 IDE_LED+ IDE_LEDGround Reset System panel connector IDE LED RESET · Hard disk drive activity LED (Red 2-pin IDELED) This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD. ASUS Vintage-AH1 TPA1+ GND TPB1+ +12V TPA1GND TPB1+12V GND 4-11 · ATX power button/soft-off button (Yellow 2-pin PWRSW) This connector is for the system power button. Pressing the power button turns the system on or puts the system in sleep or soft-off mode depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. Reset button (Blue 2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. · 1 4 . System panel connector (20-1 pin PANEL) This connector supports several chassis-mounted functions. PLED PLED+ PLED- SPEAKER +5V Ground Ground Speaker PANEL IDE_LED+ IDE_LED® IDE_LED RESET PWRSW System Panel connector * Requires an ATX power supply. The sytem panel connector is color-coded for easy connection. [. . . ] Configuration options: [No Access] [View Only] [Limited] [Full Access] N o A c c e s s prevents user access to the Setup utility. V i e w O n l y allows access but does not allow change to any field. L i m i t e d allows changes only to selected fields, such as Date and Time. F u l l A c c e s s allows viewing and changing all the fields in the Setup utility. Change User Password Select this item to set or change the user password. [. . . ]