User manual ASUS X-MARSLITE

[. . . ] Specifications and information contained in this manual ae furnished for informational use only, and are subject to change at any time without notice, and should not be construed as a commitment by ASUS. ASUS assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual, including the products and software described in it. Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. ii Contents Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Configuration options: [Enabled] [Disabled] The following item appears only when you set Intel(R) VT-d to [Enabled]. Coherency Support [Disabled] Allows you to enable/disable VT-d Engine Coherency support. Configuration options: [Disabled] [Enabled] ATS Support [Disabled] Allows you to enable/disable VT-d Engine address translation services (ATS) support. Configuration options: [Disabled] [Enabled] 5. 4. 4 SATA SATA SATA SATA SATA SATA PCH SATA Configuration Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Advanced Not Present ASUS DWR ATAPI WDC WD800JD(80. 0GB) Not Present Not Present Not Present [AHCI Mode] [Enabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] (1)IDE Mode. (3)RAID Mode. Port1 Port2 Port3 Port4 Port5 Port6 SATA Mode S. M. A. R. T. Status Check Port Port Port Port Port Port 1 2 3 4 5 6 Staggered Staggered Staggered Staggered Staggered Staggered Spin-up Spin-up Spin-up Spin-up Spin-up Spin-up →←: Select Screen ↑↓: Select Item Enter: Select Item +/-: Change Opt. F1: General Help F2: Previous Values F5: Optimized Defaults F10: Save & Exit ESC: Exit Version 2. 15. 1219. Copyright (C) 2011 American Megatrends, Inc. 5-20 Chapter 5: BIOS setup SATA Mode [AHCI Mode] Allows you to set the SATA configuration. Configuration options: [Disabled] [IDE Mode] [AHCI Mode] [RAID Mode] • • If you want to use the Serial ATA hard disk drives as Parallel ATA physical storage devices, set this item to [IDE Mode]. If you want the Serial ATA hard disk drives to use the Advanced Host Controller Interface (AHCI), keep the default setting [AHCI Mode]. The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands. F1: General Help F2: Previous Values F5: Optimized Defaults F10: Save & Exit ESC: Exit Version 2. 15. 1219. Copyright (C) 2011 American Megatrends, Inc. Launch Storage OpROM [Enabled] Allows you to enable or disable boot option for legacy mass storage device with option ROM. Configuration options: [Disabled] [Enabled] PCIE1 Option Rom [Enabled] PCIE2 Option Rom [Enabled] PCIE3 Option Rom [Enabled] PIKE Option Rom [Enabled] Configuration options: [Disabled] [Enabled] Configuration options: [Disabled] [Enabled] Configuration options: [Disabled] [Enabled] Configuration options: [Disabled] [Enabled] 5-24 Chapter 5: BIOS setup 5. 4. 7 Onboard LAN Configuration Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. [PXE] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] Onboard LAN Configuration Intel LAN ROM Type Intel LAN1 Enable LAN1 Option ROM Support Intel LAN2 Enable LAN2 Option ROM Support Intel LAN3 Enable LAN3 Option ROM Support Intel LAN4 Enable LAN4 Option ROM Support →←: Select Screen ↑↓: Select Item Enter: Select Item +/-: Change Opt. F1: General Help F2: Previous Values F5: Optimized Defaults F10: Save & Exit ESC: Exit Version 2. 15. 1219. Copyright (C) 2011 American Megatrends, Inc. Intel LAN ROM Type [PXE] Configuration options: [PXE] [iSCSI] The following item appears only when you set Intel LAN Support to [Enabled]. Intel LAN1 Enable [Enabled] Allows you to enable or disable Intel® LAN1 function. Configuration options: [Disabled] [Enabled] LAN1 Option ROM Support [Enabled] Configuration options: [Disabled] [Enabled] Intel LAN2 Enable [Enabled] Allows you to enable or disable Intel® LAN2 function. Configuration options: [Disabled] [Enabled] LAN2 Option ROM Support [Enabled] Configuration options: [Disabled] [Enabled] Intel LAN3 Enable [Enabled] Allows you to enable or disable Intel® LAN3 function. Configuration options: [Disabled] [Enabled] LAN3 Option ROM Support [Enabled] Configuration options: [Disabled] [Enabled] ASUS X-MARSLITE; RS926-E7/RS8 5-25 Intel LAN4 Enable [Enabled] Allows you to enable or disable Intel® LAN4 function. Configuration options: [Disabled] [Enabled] LAN4 Option ROM Support [Enabled] Configuration options: [Disabled] [Enabled] 5-26 Chapter 5: BIOS setup 5. 4. 8 Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Auto option disables legacy support if no USB devices are connected. [. . . ] You need to manually install the ASPEED VGA driver on a Windows® operating system. To install the ASPEED VGA driver: 1. 2. Insert the motherboard/system support DVD to the optical drive. The support DVD automatically displays the Drivers menu if Autorun is enabled in your computer. If Autorun is NOT enabled in your computer, browse the contents of the support DVD to locate the file ASSETUP. EXE from the BIN folder. Double-click the ASSETUP. EXE to run the support DVD. Restart the computer, and then log on with Administrator privileges. 3. Click the ASPEED AST2300 Display Driver to begin installation. 4. When the ASPEED Graphics installation wizard appears, click Next to start the installation. 7-20 Chapter 7: Driver installation 5. Toggle I accept the terms in the license agreement and click Next to continue. 6. Enter the user information and click Next to continue. 7. Select a setup type and click Next to continue. ASUS X-MARSLITE; RS926-E7/RS8 7-21 8. Click Install to start driver installation. 9. When the installation completes, click Finish to restart your computer before using the program. 7-22 Chapter 7: Driver installation 7. 5  Intel® C600 Series Chipset SATA RAID Drivers This section provides the instructions on how to install the Intel® C600 Series Chipset Drivers on the system. [. . . ]