User manual ASUS X56KR EXPRESS GATE QUICK START GUIDE

[. . . ] Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe. · Intel, LANDesk, and Pentium are registered trademarks of Intel Corporation. · IBM and OS/2 are registered trademarks of International Business Machines. · Symbios is a registered trademark of Symbios Logic Corporation. [. . . ] System Power LED (KEYLOCK, 3 pins) This 3-pin connector connects the system power LED, which lights when the system is powered on and blinks when it is in sleep mode. Keyboard Lock Switch Lead (KEYLOCK, 2 pins) This 2-pin connector connects to the case-mounted key switch to allow keyboard locking. Speaker Connector (SPEAKER, 4 pins) This 4-pin connector connects to the case-mounted speaker. Keyboard Lock PLED KEYLOCK Ground Message LED Reset SW SMI Lead ATX Power Switch* *Requires an ATX power supply X56KR System Panel Connectors 34 ASUS X56KR User's Manual +5 V LED ExtSMI# Ground PWR_SW +3VSB ResetCon Ground +5V Ground Ground SPKR +5 V III. INSTALLATION Connectors Power LED Speaker Connector R III. INSTALLATION Power Connection Procedures 1. After all connections are made, close the system case cover. Be sure that all switches are off (in some systems, marked with ). Connect the power supply cord into the power supply located on the back of your system case according to your system user's manual. Connect the power cord into a power outlet that is equipped with a surge protector. You may then turn on your devices in the following order: a. External SCSI devices (starting with the last device on the chain) c. Save Current BIOS To File This option allows you to save a copy of the original motherboard BIOS in case you need to reinstall it. It is recommended that you save AFLASH. EXE and the BIOS file to a bootable floppy disk. To save your current BIOS, type [1] at the Main Menu and then press <Enter>. The Save Current BIOS To File screen appears. Type a filename and the path, for example, A:\440XX1 and then press <Enter>. ASUS X56KR User's Manual IV. Update BIOS Including Boot Block and ESCD This option updates the boot block, the baseboard BIOS, and the ACPI extended system configuration data (ESCD) parameter block from a new BIOS file. See the next page for procedures on downloading an updated BIOS file. To update your current BIOS, type [2] at the Main Menu and then press <Enter>. The Update BIOS Including Boot Block and ESCD screen appears. Type the filename of your new BIOS and the path, for example, A:\XX2I1002. AWD, and then press <Enter>. When prompted to confirm the BIOS update, press Y to start the update. The utility starts to program the new BIOS information into the flash ROM. When the programming is finished, Flashed Successfully will be displayed. Follow the onscreen instructions to continue. ASUS X56KR User's Manual 37 IV. [. . . ] The blue text "Press [ENTER] for detail" contains a second pop-up menu is available, use the + - (plus-minus) keys to change the settings. Enter to exit and save, ESC to exit and not save. If the user has made changes, ESC will prompt you to answer Y or N. Enter Y to go back to the left-hand screen and save, enter N to go back to left-hand screen and not save. [. . . ]