User manual ASUS XITPAD CONTROL

[. . . ] (C), Testing the Directional key: Digital Mode: Press the upper, the lower, the left, the right and 45°, 135°, 225°, 315° of the Directional Key, the X/Y Axes in the testing page will move correspondingly. Analog Mode: Press the upper, the lower, the left, the right and 45°, 135°, 225°, 315° of the Directional Key, the "Pov Info" in the testing page will have 8 directional arrows correspondingly. Enter "Calibration" for correction The calibration is proceeded under the Analog Mode (Led Indicator is on) while "+" cursor isn't in the center position. You only need to press "Default" first, then "set" to calibrate. Enter the "Effect Page" to test the vibration of motor: Under Analog mode, press the right or the left of the Left Stick, and the corresponding left motor vibrates. [. . . ] Please define a certain speed before definition of Macro function on an action button. Fast motion: Press Macro button Macro Led is on Press the upper of the Directional Button Slow motion: Press Macro button Macro Led is on Press the lower of the Directionalbutton (D), Remarks: Only 4 buttons "5, 6, 11, 12" can be defined with Macro function. After definition, its original function disappears. Each Macro function can be defined with the functions of 15 action buttons at most. Buttons "9, 10" are used as space button to compart two same actions or prolong time in the process of defining Macro function. The definition and clearance of Turbo function (A), Definition of Turbo function Under Digital mode, the buttons "1 to 8" can be defined with Turbo function. Under Analog mode, the buttons "1 to 8" and "11, 12" can be defined with Turbo function. For an example: press Turbo button first, then press any button, e. g. Thus, button "3" is with Turbo function. Remember not to press "Turbo" and button "3" at the same time because this will cause the buttons `1 to 8" and "11, 12" to be with Turbo function under Analog mode, and cause the nullification of Macro function, too. (B), Clearance of Turbo function a) Press Clear button, and the Turbo function on all buttons vanishes. Remember that there is no way to clear the Turbo function on one button, but on all buttons. b) When buttons "5, 6, 11, 12" are defined with both Macro and Turbo functions at the same time, the Turbo function will be null until the Macro function is cleared. 5. Troubleshooting If the game controller doesn't work after setting up Software and Hardware: (A), Please check whether the controller cable is steadily connected with your PC; (B), Make sure that the correct options are selected. "Game Port Controller" in the "Game Controller" in menu "Control Panel" is "Confirmation", and "Controller ID" shows "1". (C), Make sure that I/O value of game controller doesn't impact with that of other accessories. (D), Please restart your PC if the game controller still cannot work. The driving system "PC Dual Shock" cannot be installed or there is no reaction while testing the controller after installation. Please change to DirectX 7. 0 Version or up. There is no vibration from motor while playing racing games. If it still cannot work normally, restart your PC. Some analog axes can go into effect automatically after you enter the games. [. . . ] The solution is to press Clear button, then press any button among the buttons "1 to 8". Or you can re-connect the controller with your PC computer. The GameLiveShow and GameReplay provided in the CD-ROM are the latest features in one application that will only work with ASUS graphic cards. Please install the provided ASUS Enhanced Driver in the CDROM first then install the GameLiveShow/GameReplay application. 2X 1. [. . . ]