User manual ASUS Z9PE-D8 WS

[. . . ] Selecting the boot drive from a RAID set. 5-32 Setting the Boot array in the BIOS Setup Utility. A-3 Reference information vii Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • • This device must accept any interference received including interference that may cause undesired operation. [. . . ] 8 Boot menu Exit The Boot menu items allow you to change the system boot options. ] Number of seconds to wait for setup activation key. Setup Prompt Timeout [xx] Use the <+> and <-> keys to adjust the number of seconds to wait for setup activation key. Bootup NumLock State [On] This item allows you to select the power-on state for the NumLock. Configuration options: [Off] [On] Full Screen Logo [Enabled] This item allows you to enable or disable the full screen logo display feature. Set Full Screen Logo to [Disabled] to select the desired Post Report waiting time from 1~10 sec. Post Report [5 sec] Allows you to select a desired post report waiting time. This item only appears when you set the Full Screen Logo to [Disabled]. Configuration options: [1 sec] - [10 sec] [Until Press ESC ASUS Z9PE-D8 WS 4-47 CSM16 Module Version GateA20 Active [Upon Request] [Upon Request] GA20 can be disabled using BIOS services. [Always]  o not allow disable GA20; this optionis useful when any RT code D is executed above 1MB. Option ROM Messages [Force BIOS] Allows you to set the display mode for Options ROM. 10 Security menu The Security menu items allow you to change the system security settings. aptio Setup Utility - Copyright (C) 2011 American Megatrends , Inc. Main Ai Tweaker Advanced Server Mgmt Event Logs Boot Monitor Security Tool Exit Password Description If ONLY the Administrator's password is set, then this only limits access to Setup and is only asked for when entering Setup If ONLY the User's password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup the User will have Administrator rights The password length must br in the following range: Minimum length 3 Maximum length 20 Administrator Password User Password Set Setup Administrator Password If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password. 6 Jumpers for information on how to erase the RTC RAM. Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected fields in the BIOS setup program. From the Create New Password box, key in a password, then press <Enter>. To change an administrator password: From the Enter Current Password box, key in the current password, then press <Enter>. From the Create New Password box, key in a new password, then press <Enter>. select the Administrator Password item and press <Enter>. [. . . ] 7-10 Chapter 7: Multiple GPU technology support B1. If you cannot see the NVIDIA Control Panel item in step (A), select Personalize. From the Personalization window, select Display Settings. From the Display Settings dialog box, click Advanced Settings. [. . . ]