User manual ATEN CS62DU

[. . . ] This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. RoHS This product is RoHS compliant. SJ/T 11364-2006 The following contains information that relates to China. ii CS62DU / KH1516 User Manual User Information Online Registration Be sure to register your product at our online support center: International North America ATEN TECH ATEN NJ http://support. aten. com http://www. aten-usa. com/product_registration http://support. aten. com Telephone Support For telephone support, call this number: International North America ATEN TECH ATEN NJ 886-2-8692-6959 1-888-999-ATEN 1-732-356-1703 User Notice All information, documentation, and specifications contained in this manual are subject to change without prior notification by the manufacturer. The manufacturer makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties as to merchantability or fitness for any particular purpose. Any of the manufacturer's software described in this manual is sold or licensed as is. [. . . ] Repeat until all access rights have been set, then press [Esc]. The default is F for all users on all ports. Note: A blank setting means that no access rights are granted. The port will not show up on the user's LIST on the Main Screen. RESET If you change the position of one of the stations in the daisy-chain, the STATION IDS OSD settings will no longer correspond to the new situation. This function directs the OSD to rescan the station positions of the entire installation and updates the OSD so that the OSD station information corresponds to the new physical layout. Note: Only the station numbers get updated. Except for the port names, all administrator settings (such as Set Accessible Ports, Set Quick View Ports, etc. ), for all of the computers affected by the change, have to be manually redone. (Continues on next page. ) 30 Chapter 4. OSD Operation (Continued from previous page. ) Setting SET OPERATING SYSTEM Function Specifies the operating platform of the computer attached to each port. For each port, press the [Spacebar] to cycle through the choices (PC, Mac, Sun, and Other). Repeat until all the ports have been set, then press [Esc]. This function is particularly useful for operations that need to be performed on multiple computers, such as performing a system wide shutdown, installing or upgrading software, etc. BRC works in conjunction with the F2 LIST function. The LIST function (see page 25), is used to broaden or narrow the focus of which ports appear on the OSD Main Screen. When you broadcast a command, it is to the ports currently displayed on the OSD Main Screen. While BRC mode is in effect, a speaker symbol appears before the port ID display of the port that currently has the console focus. While BRC mode is in effect, the mouse will not function normally. You must exit BRC mode in order to regain control of the mouse. To exit BRC mode, invoke the OSD (with the OSD Hotkey), then click the F6 field, or press [F6], to turn BRC mode off. 33 CS62DU / KH1516 User Manual F7: SCAN This function automatically switches among the available computers at regular intervals so that you can monitor their activity without having to take the trouble of switching manually. The selection of computers to be included for Auto Scanning is made with the Scan/Skip mode setting under the F3 SET function (see page 27). The amount of time that each port displays for is set with the Scan Duration setting under the F3 SET function (see page 26). As each computer is accessed, an S appears in front of the port ID display to indicate that it is being accessed under Auto Scan mode. [. . . ] If your product is not running the latest firmware version, we strongly recommend that you upgrade. See The Firmware Upgrade Utility, page 45, for upgrade details. Symptom Mouse and/or Keyboard not responding. Action The mouse and/or keyboard need to be reset. Unplug the cable(s) from the console port(s), then plug it (them) back in. [. . . ]