User manual ATIKA BIOQUICK 2500

[. . . ] You may not start to operate the machine until you have read these original instructions, observed all the instructions given and installed the machine as described!Keep the instructions in a safe place for future use. Electrical devices do not go into the domestic rubbish. give devices , accessories and packaging to an ecofriendly recycling. [. . . ] Also observe the preventive regulations of your professional association and the safety provisions applicable in the respective country, in order to protect yourself and others from possible injury. Pass the safety instructions on to all persons who work with the machine. Keep these safety instructions in a safe place. Machine including safety cut-out The safety cut-out, including an automatic motor brake, which is attached to the shredder is used for the safety of the machine, preventing the motor being started when the machine is open and the rotating knives could be 10 Do not leave the machine standing in the rain or use when raining. Switch the machine off and remove the mains plug from the socket when - Performing maintenance and cleaning work. - Checking connecting lines, whether these are knotted or damaged. If the machine's filling funnel or ejection slot is blocked switch off the motor and disconnect the mains plug before removing material from the filling funnel or ejection slot. Check the machine for possible damage: - Before further use of the machine the safety devices must be checked carefully for their proper and intended function. - Check whether movable parts function perfectly and do not stick or whether parts are damaged. all parts must be correctly installed and fulfil all conditions to ensure perfect operation of the machine. - Damaged safety devices and parts must be properly repaired or exchanged by a recognized, specialist workshop; insofar as nothing else is stated in the instructions for use. - Damaged or illegible safety labels have to be replaced. Store unused equipment in a dry, locked place out of the reach of children. Only hook up the machine by means of a fault-current circuit breaker (30 mA). The electrical connection or repairs to electrical parts of the machine must be carried out by a certified electrician or one of our customer service points. Local regulations ­ especially regarding protective measures ­ must be observed. Repairs to other parts of the machine must be carried out by the manufacturer or one of his customer service points. Accidents can arise for the user through the use of other spare parts. The manufacturer is not liable for any damage or injury resulting from such action. Do not place the equipment on ground which is paved or surfaced with gravel. the machine should only be operated in the open. Always maintain a safe distance (at least 2 m) from walls or other fixed objects. [. . . ] Remove any side shoots from branches with a large number of twigs. The cutters will not come to a standstill immediately after cut-off. Before starting any service work wait until all parts are stationary. Be sure to have removed any tools from the machine after completion of service work. [. . . ]