User manual ATIKA GSC 3,6 BROCHURE

[. . . ] Do not operate machine before having read the operating instructions, understood all the notes and assembly the machine as described here. Keep the instructions in a safe place for future use. Extent of delivery 13 Operating times 13 Declaration of conformity 13 Symbols on product / charger 14 Symbols operating instructions 14 Normal intended use 14 Residual risks 14 Security instructions 15 ­ Workplace safety 15 ­ Electrical safety 15 ­ Safety of persons 15 ­ Using and handling the power tool 16 ­ Using and handling the battery-operated product 16 ­ Service 16 Safety notes for battery-operated shrub and grass shears 16 Safety notes for charger 16 Safety instructions 16 Description of device / Spare parts 17 Before the first commissioning 17 ­ Charging the rechargeable battery 17 ­ Assembling the telescopic handle 17 Commissioning 17 Working instructions 18 Maintenance and cleaning 18 Changing the cutting tools 19 Storage 19 Guarantee 19 Disposal 19 ­ Removing the rechargeable battery 19 ­ Transport 19 Possible faults 20 Technical data 20 Before initiating the device please observe the provisions pertaining to corresponding laws (regional provisions) for the noise control. KG Schinkelstraße 97 59227 Ahlen - Germany herewith declare under our sole responsibility that the product Shrub and grass shear type GSC 3, 6 Shrub and grass shear type GSCT 3, 6 is conform with the above mentioned EC directives as well as with the provisions of the guidelines below: 2000/14/EG, 2004/108/EG and 2006/95/EG. [. . . ] Protective equipment such as dust mask, nonskid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Battery tool use and care a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. B) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. C) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. shorting the battery terminals together may cause burns or a fire. D) Under abusive conditions, liquid may be ejected from the battery; avoid contact. if contact accidentally occurs , flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. Is an increased risk of an electric shock when water penetrates into the charger. Only use the charger for the dedicated power tool. Its use for other power tools may result in injuries and fire. Do not operate the charger on combustible surfaces (such as paper, textiles). There is a risk of fire as the charger heats up during the charging process. Before each use, check the charger, charger cable and cable connector for damages. Have your charger only be repaired by qualified specialized personnel with genuine spare parts. This will ensure that the device is kept in a safe condition. Within his area of work the operator is responsible for third parties. Do not leave the power tool in direct sunlight and protect it against heat. Otherwise, there is a risk of explosion. [. . . ] Risk of injury to the fingers and hands when carrying out work on the cutting tool. The cutting tools are subject to heavy wearing. Immediately exchange cutting tools when the faultless function is not guaranteed. If you have used the product with assembled telescopic handle press the unlocking knob (21) and pull the telescopic handle out of its holder (16). [. . . ]