User manual ATIKA HS 600

[. . . ] Not observing this instruction can lead to injuries or cause damage to property. important information on proper handling. Not observing this instruction can lead to faults in the machine. This information helps you to use all the functions optimally. [. . . ] Take into consideration environmental influences: - Do not expose the hedge shears to the rain. - Do not use the hedge shears in humid or wet environment. - Do only work with sufficient visibility conditions - Do not use the hedge shears near inflammable liquids or gases. never leave the hedge shears unattended. Persons under 18 are not allowed to operate the device. Do not allow other persons, especially children, to touch the tool or cable. You work better and safer in the given performance range. Only operate the machine with complete and correctly attached safety equipment and do not alter anything on the machine that could impair the safety. Do not use any knives which do not comply with the indicated characteristics of this instruction manual. The use of other tools and other accessories can signify a risk of injury for you Switch the machine off and remove the mains plug from the socket when - carrying out repair works - carrying out servicing and repair works, removal of faults (including blocking of knives) - Transport and storage - Leaving of hedge trimmer (even during short interruptions) Maintain your hedge trimmer with care: - Keep the tools sharp and clean to be able to work better and more safely - Keep handles dry and free of oils and grease. Before commissioning this product, read and keep to the following advice. Also observe the safety provisions applicable in the respective country, in order to protect yourself and others from possible injury. Pass the safety instructions on to all persons who work with the machine. Keep these safety instructions in a safe place. Check the machine for possible damage: - Before continuing to use the machine, the protective devices must be inspected to ensure that they work perfectly and with their intended function - Check whether the movable parts function perfectly and do not stick or whether the parts are damaged. All parts must be correctly installed and fulfil all conditions to ensure perfect operation of the hedge trimmer - Damaged guards and parts must be properly repaired or exchanged by a recognized, specialist workshop; insofar as nothing else is stated in the instructions for use. - Damaged or illegible safety warning labels should be replaced immediately. Do not allow any tool key to be plugged in!Before switching on, check always that wrenches and adjusting tools are removed. Store the unused machine in a dry locked place away from the reach of children. The manufacturer is not liable for any damage or injury resulting from such action. Compare the voltage given on the machine model plate e. [. . . ] Due to its double sided knives the hedge trimmer can be guided forward and backward or by oscillating movements from one to another side, fig. At first cut the sides of the hedge and then the upper edge. Stretch a guide over the complete length of the hedge when you want to shorten the upper edge of the hedge evenly. Remove unconditionally any foreign objects out of the hedge (e. [. . . ]