User manual ATIKA HS 600-55 BROCHURE

[. . . ] Not observing this instruction can lead to faults in the machine. This information helps you to use all the functions optimally. Here you are explained exactly what to do. Hand guard Operating manual Before initiating the device please observe the provisions pertaining to corresponding laws (regional provisions) for the noise control. [. . . ] Only operate the machine with complete and correctly attached safety equipment and do not alter anything on the machine that could impair the safety. Do not use any knives which do not comply with the indicated characteristics of this instruction manual. The use of other tools and other accessories can signify a risk of injury for you Switch the machine off and remove the mains plug from the socket when - carrying out repair works - carrying out servicing and repair works, removal of faults (including blocking of knives) - Transport and storage - Leaving of hedge trimmer (even during short interruptions) Maintain your hedge trimmer with care: - Keep the tools sharp and clean to be able to work better and more safely - Keep handles dry and free of oils and grease. - Follow the servicing instructions Check the machine for possible damage: - Before continuing to use the machine, the protective devices must be inspected to ensure that they work perfectly and with their intended function - Check whether the movable parts function perfectly and do not stick or whether the parts are damaged. Before commissioning this product, read and keep to the following advice. Also observe the safety provisions applicable in the respective country, in order to protect yourself and others from possible injury. Pass the safety instructions on to all persons who work with the machine. Keep these safety instructions in a safe place. Make yourself familiar with the equipment before using it, by reading and understanding the operating instructions. Provide a safe standing position and keep at any time the balance. Parts must be correctly installed and fulfil all conditions to ensure perfect operation of the hedge trimmer - Damaged guards and parts must be properly repaired or exchanged by a recognized, specialist workshop; insofar as nothing else is stated in the instructions for use. - Damaged or illegible safety warning labels should be replaced immediately. Do not allow any tool key to be plugged in!Before switching on, check always that wrenches and adjusting tools are removed. Store the unused machine in a dry locked place away from the reach of children. Compare the voltage given on the machine model plate e. Use connection cable or extension cable respectively with a cross section of at least 1, 5 mm². Design of the connection cable according to IEC 60245 (H 07 RN-F) with a core cross-profile section of at least - 1. Avoid touching earthed parts with your body. Do not use the cable for purposes for which it is not meant. Protect the cable against heat, oil and sharp edges. Do not use the cable to pull the plug from the socket. [. . . ] Store unused equipment in a dry, locked place out of the reach of children. To extend the service life of the hedge trimmer and guarantee smooth operation, before storing for a longer period - thoroughly clean the hedge trimmer - treat all movable parts with an environmentally friendly oil Never use any grease!Remove the plug from the power socket before starting any maintenance or cleaning work. For maintaining and cleaning, removed security devices must unconditionally be mounted properly and proved again. [. . . ]