User manual ATIKA HSC 580-18 BROCHURE

[. . . ] Do not operate machine before having read the operating instructions, understood all the notes and assembly the machine as described here. Keep the instructions in a safe place for future use. Extent of delivery Operating times EC Declaration of Conformity Symbols operating manual Symbols on machine / charger / battery Normal intended use Risidual risks Safety Notes ­ General Power Tool Safety Warnings ­ Safety instructions for hedge trimmers ­ Safety notes for chargers ­ Safety instructions for the battery ­ Safe working Description of device / spare parts Before the first start-up ­ Charging the rechargeable battery Start-up ­ Switching on / off Work instructions ­ Working with the hedge trimmer ­ Vibrations Maintenance and cleaning Maintenance Cleaning Transport Storage Disposal ­ Transport Guarantee Possible faults Technical data 13 13 13 13 14 14 14 15 15 16 16 16 16 17 17 17 17 17 18 18 18 18 18 18 19 19 19 19 19 19 20 Before initiating the device please observe the provisions pertaining to corresponding laws (regional provisions) for the noise control. KG Schinkelstraße 97 59227 Ahlen ­ Germany herewith declare under our sole responsibility that the product Hedge trimmer HSC 580/18 is conform with the above mentioned EC directives as well as with the provisions of the guidelines below: 2004/108/EG, 2000/14/EG, 2006/95/EG Following harmonized standards have been applied: EN 60745-1:2006; EN 60745-2-15:2006; EN 55014-1:2006; EN 55014-2:1997+A1:2001 Conformity assessment procedure: 2000/14/EC - Appendix V. [. . . ] A moment of inattention while operating power tools may result in serious personal injury. Battery tool use and care a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. B) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. C) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. shorting the battery terminals together may cause burns or a fire. D) Under abusive conditions, liquid may be ejected from the battery; avoid contact. if contact accidentally occurs , flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. A) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Do not operate the charger on combustible surfaces (such as paper, textiles). There is a risk of fire as the charger heats up during the charging process. Before each use, check the charger, charger cable and cable connector for damages. Have your charger only be repaired by qualified specialized personnel with genuine spare parts. This will ensure that the device is kept in a safe condition. Do not continue the charging process when the battery is not fully charged after the indicated charging time has lapsed. Otherwise, there is a risk of fire or explosion. Only charge the battery at temperatures between 10°C and 40°C. Otherwise, the battery may be damaged or its service life may be reduced. [. . . ] Never use any grease Use environmentally friendly oil. Keep handles dry and free of oils and grease. Electrical devices do not go into the domestic rubbish. According to the European Directive 2002/96/EC on electrical and electronic scrap, electrical devices that are no longer serviceable must be separately collected and brought to a facility for an environmentally compatible recycling. [. . . ]