User manual ATIKA KS 2001-40 BROCHURE

[. . . ] Do not operate machine before having read the operating instructions, understood all the notes and assembly the machine as described here. Keep the instructions in a safe place for future use. Electrical devices do not go into the domestic rubbish. Überprüfen Sie die Kettensäge auf offensichtliche Mängel wie - lose, ausgehängte oder beschädigte Sägekette - lose Befestigung - verschlissene oder beschädigte Bauteile Überprüfen Sie die Kettensäge nach jedem Gebrauch auf - Verschleiß, insbesondere Kette, Schwert und Kettenrad. [. . . ] A new saw chain must be reclamped more often until it has elongated. The plug connection is now saved against automatic release. When carrying out the works observe that the extension cable is always leading backwards from the chain saw, and is outside the zone of the saw chain and the sawing material. Saw backstroke is the sudden strike upwards or backwards of the running chain saw in direction of the operator. This happens when - the sword pike gets in contact with the sawing material (unintended) or other hard objects. The chain saw reacts uncontrolled and causes frequently heavy injuries with the operator. Carry out lateral cuts, diagonal cuts and longitudinal cuts with increased attention because here the claw stopper (16) is not put on. - - - - - - - - - - - - - Never try to put on the sword pike for cutting. 12 Never saw with the upper egde of the sword pike. 13 Always put on the chain saw as plane as possible. 15 Start cutting only with running saw chain. Never switch on the machine with the saw chain put on. Only work with sharp and correctly sharpened saw chain. Never work with loose or worn out saw chain. Only work with correctly clamped saw chain. Always hold the chain saw firmly with both hands. Never cut through several perches at the same time. When releasing make sure that no other perch is touched. If possible use a sawhorse when cutting to length. Stab cuts shall only be carried out by instructed personal. + Do not use the chain saw for lifting or moving of wood. + Make sure that the wood is free of foreign object (stones, nails etc). [. . . ] For sharpening a saw chain some expertise is necessary. The saw chain must be regrinded in a specialised shop. You can also sharpen your saw chain yourself by using our electric sharpener KSG 220 (article-no. You can only work safely and well with a sharp and clean saw chain. [. . . ]