User manual ATIKA KSL 2200-40 BROCHURE

[. . . ] Do not operate machine before having read the operating instructions, understood all the notes and assembly the machine as described here. Keep the instructions in a safe place for future use. Electrical devices do not go into the domestic rubbish. Überprüfen Sie die Kettensäge auf offensichtliche Mängel wie - lose, ausgehängte oder beschädigte Sägekette - lose Befestigung - verschlissene oder beschädigte Bauteile Überprüfen Sie die Kettensäge nach jedem Gebrauch auf - Verschleiß, insbesondere Kette, Schwert und Kettenrad. [. . . ] This happens when - the sword pike gets in contact with the sawing material (unintended) or other hard objects. The chain saw reacts uncontrolled and causes frequently heavy injuries with the operator. Carry out lateral cuts, diagonal cuts and longitudinal cuts with increased attention because here the claw stopper (16) is not put on. - - - - - - - - - - - - - Never try to put on the sword pike for cutting. 12 Never saw with the upper egde of the sword pike. 13 Always put on the chain saw as plane as possible. 15 Start cutting only with running saw chain. Never switch on the machine with the saw chain put on. Only work with sharp and correctly sharpened saw chain. Never work with loose or worn out saw chain. Only work with correctly clamped saw chain. Always hold the chain saw firmly with both hands. Never cut through several perches at the same time. When releasing make sure that no other perch is touched. If possible use a sawhorse when cutting to length. Stab cuts shall only be carried out by instructed personal. Do not use the chain saw for lifting or moving of wood. Make sure that the wood is free of foreign object (stones, nails etc). Hold the chain saw always firmly with both hands, left hand on the front handhold (4) and right hand on the rear handhold (17). 14 Make sure that the wood can not turn when sawing. There is risk of injury by wood pieces carried away. Initiate saw chain before getting in contact with the wood. [. . . ] Transport the chain only with the chain protection put on. We grant a guarantee of two years, commencing with the day of delivery from the dealer's store, for material and manufacturing faults. Warranty claims, even during the warranty period, will not be accepted for damages due to incorrect handling or inadequate packaging during return of the devices or to a non-observance of the operating instructions. Faulty parts must be sent to our works, postage or freight free. [. . . ]