User manual ATLINKS TEMPORIS 03

[. . . ] You need an RJ11C type modular jack, which is the most common type of phone jack and might look like the one pictured here. If you don't have a modular jack, call your local phone company to find out how to get one installed. If you have Pulse ( rotary ) service and want to access customer calling services that require touch ­tone dialing , such as getting information from a local bank , you can use this feature. [. . . ] Your telephone may also be mounted on a wall plate (not included). Slip the mounting holes (on the bottom of the base) over the wall plate posts and firmly slide the unit down into place. Plug the telephone line cord into a modular wall phone jack. You can dial numbers from memory when using the handset. When you get a dial tone, press the MEM button followed by the memory location (0-9) for the number you want to dial. Use the REDIAL button to add pauses to a dialing sequence, for example after you dial 9 for an outside line. PROBLEM No dial tone Won't dial out Phone doesn't ring SOLUTION · Make sure TONE / PULSE is set to correct position. You might have too many phones on one line. ⷠThis is normal, power fluctuates with phone outpulsing. ⷠMake sure phone cord is securely plugged in. ⷠMake sure other phones aren't off the hook at the same time you ' re using the phone. It is normal for the volume to drop when additional phones are used at the same time. Your Telephone is designed to give you flexibility in use, and high quality performance. To get the most from your new telephone, we suggest that you take a few minutes right now to read through this instruction manual. [. . . ] You should return it to your reseller or dispose of it in an approved recycling centre. Dial the telephone number you wish to call, while the LCD displays `'. After 5 sec, a talk timer will be displayed. [. . . ]