User manual ATLINKS VERSATIS P100

[. . . ] Don't let the base unit or charger gets wet. Electrical equipment can cause serious injury if used while you are wet or standing in water. If the base unit or charger ever falls into water, don't retrieve it until you have unplugged the power lead from the mains and the telephone line plug from the telephone socket (base unit only); then pull it out by the unplugged cables. Never use your cordless handset outdoors during a thunderstorm unplug the base unit from the telephone line and the mains socket when there are storms in your area. [. . . ] You can also turn on the alert tones when low battery and out of range are detected. Low battery tone will be emitted while you are talking with the phone to alert you that you need to charge up your battery. Press <MENU> and <UP/DOWN> to select HS SETTINGS. Press <OK> and <UP/DOWN> to select TONE SETUP. Press <OK> and <UP/DOWN> to select KEY TONE / BATTERY TONE / OUT OF RANGE. Press <OK> and <UP/DOWN> to turn on or off these tones. Press <OK> to confirm. DEFAULT SETTINGS TROUBLESHOOTING No dialing tone when pressing <TALK ON> key 1. Check that the telephone line cord has been plugged into the base station and the phone socket. Move the cordless handset closer to the telephone base. Disconnect the telephone base from the telephone jack and connect a different telephone. If there is no dial tone on that telephone either, the problem is your wiring or local service. Contact your local telephone service provider. My telephone does not ring when there is an incoming call PHONE OPERATION Make a Call Preparatory dialing Enter the phone number and press <TALK ON> to dial the number. - Direct Dialing Press <TALK ON> to take the line and enter the phone number. - Call from Direct Memory In idle, press and hold <KEY 1>/<KEY 2>/<KEY 3> to dial the number stored. OR Press <TALK ON> and then press and hold <KEY 1>/<KEY 2>/<KEY 3> to dial the number stored. If there is no number stored, unit will emit double beep tones. - Call from the Phonebook Press <PHONEBOOK> to access the phonebook and press <UP/DOWN> to select the desired phonebook entry. Press <TALK ON> to dial out to the selected phonebook entry. Alternatively, press <MENU/OK> to access the phonebook to get the desired phonebook entry. - Call from the Call List Press <UP> to access the Call L ist and press <UP/DOWN> to select the desired Call List entry. Press <TALK ON> to dial out to the selected Call List entry. Alternatively, press <MENU/OK> to access the Call List from the main menu. [. . . ] Press <OK> and the selected call list number is displayed. Press <OK> and <UP/DOWN> to select the melody. Follow Steps 1 and 2 in Section View the call list. Press <MENU> and <UP/DOWN> to select DELETE. [. . . ]