User manual AUDI A2 QUICK REFERENCE GUIDE

[. . . ] The belts should always be worn so that they fit tightly (see illustration). Safety of children in the vehicle Locking and unlocking the vehicle The central locking system locks and unlocks all the doors, the boot lid and the tank flap. It can be operated with the remote control or by turning the key in the lock. Operating the radioactivated remote control Press the appropriate button for about 1 second. 1 Unlocking button Open one of the doors or the boot lid within about 60 seconds, otherwise the vehicle will lock itself again automatically. [. . . ] 2 Seat backwards or forwards Lift the handle and move the seat. 3 Seat height The seat height is adjusted by pulling or pushing the lever. Adjusting belt height Move the top belt guide up or down as required. Tug the belt to check that the catch is engaged properly. Rear seats The luggage area can be extended when extra space is required; there are several alternatives: Changing angle of rear backrest Pull up the handle 1 and push the backrest forwards until the handle 1 clicks back into place. Folding down rear backrests Pull up the handle 1 and fold down the backrest. Folding down rear seat Open the rear doors. Pull up the handle 1 and fold down the backrest. Press the top of the backrest 2 down firmly in the direction indicated (arrow). Pull the release handle 3 and tip the seat forwards. Pull out the rod 4 located under the seat and insert in the retainer 5. Removing rear seats Open the rear doors. Pull up the handle 1 and fold down the backrest. Press the top of the backrest 2 down firmly in the direction indicated (arrow). Pull the release handle 3 in the direction indicated (arrow) and lift up the seat 6. Now push the seat towards the rear and lift it out of the car. Installing rear seats Engage the retainers on the seat 7 in the front mountings 8. Then press the seat into the rear mountings 9 so that it engages securely. Setting up rear seats and backrests Fold back the seat and backrest until they engage securely. Make sure that the outer rear seat belts are located in the belt guides, so that they are not trapped in the backrest catch. Instruments and warning/indicator lamps Press the button briefly with the ignition on and the vehicle stationary. · To check the auto-check control display Press the button twice with the ignition on. · To call up driver information Press the button if one of the red symbols flashes. · To activate mileage recorder display and clock Press the button when the ignition is off. · To set speed warning Press the button briefly when the desired speed is indicated on the speedometer. To clear the speed limit, press the button for at least 1 second. · To set the time/date Keep pulling the button briefly until the desired display appears. [. . . ] Move the selector lever to the left out of position D into the centre of the shift gate. Press the selector lever forwards briefly to shift up a gear, or push the lever back to shift down a gear. Notes on driving with automated manual gearbox Starting the engine and moving off · Make sure the selector lever is at STOP or N. · Press the foot-brake while starting the engine. [. . . ]