User manual AUDIO ANALOGUE CHERUBINI VT

[. . . ] Dear Audiophile, congratulations and thank you for choosing CHERUBINI VT Tuner/USBDAC. the CHERUBINI VT Tuner/USBDAC is an extremely interesting and innovative product. It is not just a Tuner but also includes an entire high performance USBDAC section. The CHERUBINI VT Tuner/USBDAC can be seen as two different audio sources combined in a single piece of equipment, each source corresponding to a different working mode: Tuner Mode and USBDAC Mode. [. . . ] Please refer to "Radio stations storage" paragraph for further details about storage procedure. Please refer to "Stored Radio stations tuning" paragraph for further details about radio stations tuning. USBDAC mode ( NEXT TRACK): During playback, starts next track playback on your play list, when playback is stopped it allows you to choose the next track on your play list. (the availability of this function depends on the software player used) AM/FM / PLAY/PAUSE: multifunction key, the function depends on the mode the unit is working in: Tuner or USBDAC TUNER mode (AM/FM): Pressing this button changes modulation type. USBDAC mode ( PLAY/PAUSE): Starts/Pauses track playback (the availability of this function depends on the software player used). SCAN DOWN: the tuning frequency is decreased to reach the first radio station which is has a lower frequency than the one it started from; if this is not possible a complete scansion of the band is carried out and the present frequency is tuned again by pressing the button. SCAN UP: the tuning frequency is increased to reach the first radio station which has a higher frequency than the one it started from; if this is not possible a complete scansion of the band is carried out and the present frequency is tuned again by just pressing the button. MONO: Pressing this button forces the unit into monophonic playback, when this option is enabled the STEREO LED is turned off. To return to normal mode, just press this button once. When the unit is in stereophonic mode, the STEREO LED is turned on when the incoming signal is stereophonic. sEARCH UP or DOWN / SELECT - STANDBY [Knob / Switch]: Clockwise rotation: (SEARCH UP). When the knob is rotated clockwise, the frequency is increased by one step (SEARCH function). When this knob is rotated anti-clockwise the frequency is decreased by one step (SEARCH function). Push (SELECT): One press and release of the knob switches between TUNER or USBDAC mode. Push (STANDBY): Keeping this button pushed for some seconds puts the unit in Stand By mode. Input USB: connect it to a USB port of your PC or MAC using a USB cable. If necessary, replace them with others of the same kind (see back panel). STANDBY TUNER: multifunction key: one press of this button switches the mode between TUNER and USBDAC. Keeping the button pushed for some seconds puts the unit in stand by mode. Be sure that the ventilation grids placed on the bottom and on the back panel of the unit are not obstructed. PLUGGING AND CONNECTING THE CHERUBINI VT tuner/usbdac Before connecting CHERUBINI VT tuner/usbdac to other equipment, please be sure they are all (your PC/MAC too) unplugged from wall outlets. First of all, connect the antennas to their inputs. [. . . ] If you have correct sounds from it, check the configuration of the previous player and also try to reinstall it. Check the band limit and the step between close frequencies is correct for your nation. Otherwise contact your Audio Analogue retailer for support in setting the correct values. Switch off the main switch in the back panel. [. . . ]