User manual AUDIO ANALOGUE PRIMO RE 1.3C

[. . . ] This equipment can't be used for different purposes other than those for which it has been manufactured. AUDIO ANALOGUE does not take any responsibilities for accidents or damages due to improper use of the equipment. WARNING Please do respect the safety standards contained in this manual before starting to operate the equipment. No further interventions than those described in this manual should be made. [. . . ] when not used for long periods , please unplug the equipment. INSTRUCTIONS TO PUT IT OUT OF SERVICE Consult qualified staff Follow the regulations of the current legislation regarding recycling and waste disposal. By pushing this button the unit is turned on/off. One of the green leds on its right indicates the selected source. In 1 may be used as phono input thanks to the optional board. A fix light indicates the selected source and the normal operative status of the unit, while a blinking light indicates that the unit is in the mute mode. It rotates just for a few degrees because it operates on an interrupter. Sixteen green leds around the volume knob progressively indicate the volume level. Turntable ground connector (to be used only when phono input is in use) PH/1. If one of the items listed above is missing, please contact your Audio Analogue retailer. After extracting the smallest items from the package, pull out the unit carefully. separate the package from the anti-shock expanded-foam protections. If batteries are not already placed in the remote controller battery slot, open the slot; insert batteries according to the indicated polarity, then close the battery slot. Where to place Primo Settanta Primo Settanta is a complex unit that may generate a large quantity of heat. please locate the unit in a well-ventilated place. In particular, you should leave at least 5cm around and above the unit and avoid placing it close to heat sources (radiators, heaters, amplifiers, television sets). Plugging and connecting Primo Settanta Before to connect Primo Settanta to a sound source, please be sure that they're both unplugged from wall outlets. First of all, hook up the sound sources outs to the Primo Settanta ins. connect recorder in to Primo Settanta tape out. Please use only high-quality cords with gold plated connectors. as the second step , connect Primo Settanta output to the speakers cable. At last, plug the Primo Settanta power cord into the wall outlet. [. . . ] Warnings on Primo Settanta use The volume knob doesn't operate on a potentiometer. It turns clockwise or anti-clockwise for a few degrees and goes back to the initial position when released. Do not force knob rotation beyond the limit of the mechanism. Both positive and negative terminals of the speakers' outs are isolated from the unit chassis (ground). [. . . ]