User manual AUDIOBAHN ADVD32TV

[. . . ] Edge Angles - If this is selected the angle, in degrees, will drawn near the corner of two selected edges. The edges must be connected to same corner. [. . . ] The same mouse actions apply as for the edge loops (One open (left) and two closed (center and right) Faceloops. División de Bucles de Caras The Loop tool allows you, eventually, to split, a loop of faces. This loop is defined as described in the previous section. in EditMode press CTRL-R rather than SHIFT-R. The edge under the cursor is aquamarine, the median line of the corresponding face loop is highlighted yellow (Splitting a Faceloop. Once the face loop selection is performed via LMB a cyan line is highlighted between the two edgeloops defining the faceloop. One of the two vertices pertaining to the edge under the mouse pointer defining the edgeloop is highlighted via a big magenta dot (Splitting a Faceloop. Now by moving the mouse the cyan edge loop moves towards or away from the magenta dot. In the 3D Window header the distance of the edge loop from the reference magenta point is given as a percentage of the edge length. You can force the edge to move in 10% steps by keeping CTRL pressed. [. . . ] Remember that the dome is the bigger part of the scene!But you can experiment with this setting to get different results. [. . . ]