User manual AUDIOLINE OSLO 580

[. . . ] 1 Intended use The telephone is suitable for telephoning within a public telephone network system. Any other use is considered unintended use. unauthorised modification or reconstruction is not permitted. Under no circumstances open the device or complete any repair work yourself. [. . . ] 2) If the name already exists in the phone book, an acoustic signal is issued {í} and the selected phone number reappears in the display. 4 Deleting a phone number from the calls list , y or z Select a phone number , Delete ?5 Deleting all phone numbers from the calls list , y or z Open the calls list 3 sec , Delete All Initiate the deleting process and confirm The telephone can be used to transfer short text messages (SMS = Short Message Service) with up to 160 characters via the conventional telephone network provided the following conditions are fulfilled: S The CLIP function is enabled for your telephone connection (refer to Section 9). s The SMS has been activated by your telephone network provider. Please note that sending text messages is subject to charges. The charges are made by your telephone network operator. If an SMS is sent to another connection in the conventional telephone network which is has no SMS service or cannot receive texts, the message is automatically provided as a voice message. Sending SMS messages is not available for Call-by-Call connections at present. Contact your telephone network provider for detailed information on transferring SMS messages via the conventional telephone network. If you want to change to a different provider, please contact our Service Hotline. 2 A text cannot be sent from every private branch exchange extension. If you want to send SMS text messages from a private branch exchange extension, it is necessary to store the number for an outside line for your PBX in the handset preceding the Service Center number. When you select writing a new SMS text, the previous text initially appears in the display. Delete the old text by pressing the button before beginning to write the new one. The way in which to enter texts is described in Section 8. This acoustic signal can be deactivated, if necessary (refer to Section 7. When all the memory locations are full, the oldest entry is deleted from the respective directory when a new SMS text message is received. This function enables SMS text messages, to which only you have access, to be received and sent. The SMS mailbox can only be used when the telephone network provider supports the facility. Therefore, ask your telephone network provider with respect to setting up your personal SMS mailbox. All the telephone answering machine (TAM) functions can be operated via the handset and also directly on the base station. 3 Number of rings (answering delay) You can select from 2 to 9 rings or choose the Tollsaver setting for the pre-remote access function. [. . . ] The answering machine memory is full Delete messages from the memory. ensure that the answering machine is connected correctly and switched on. Check whether the answering machine memory is full. Delete messages from the memory, if necessary. [. . . ]