User manual AUDIOLINE POWER PMR 44

[. . . ] The adjacent symbol indicates that electrical and electronic apparatus and batteries no longer required must be disposed of separate from domestic waste. Electrical and electronic devices must be disposed of at suitable collection points provided by the public waste authorities. Batteries must be disposed of at the point of sale or at appropriate collection points provided by the public waste authorities. Packaging materials must be disposed of according to local regulations. [. . . ] Communication between the subscribers is only then possible when both parties are using the same channel and CTCSS code. an exception is CTCSS code "00" (= OF / off). In the case of this setting, all the calls on the set channel can be heard regardless of the CTCSS code. To be able to participate in the radio communication, it may be necessary to switch from CTCSS code "00" to the CTCSS code being used. If you want to communicate with the walkie-talkies which are not using a CTCSS, you must select CTCSS code "00" on your walkie-talkie. DCS = Advanced Digital Code Alternatively to the above mentioned CTCSS code the unit offers 83 DCS codes to let you set up group of users for more secured private communication. please note that every subscriber has to set the same DCS code. Note: DCS- and CTCSS-codes can only be used alternatively. Normally the walkie-talkie will not pick up very weak signals. Press the menu key and the key simultaneously. In VOX mode your handset will transmit whenever it detects your voice (or other noise) without the PTT button having to be pressed. When turning on the VOX mode you will set the sensitivity. At the highest level (3), the handset will pickup softer noise (including background noise); at the lowest level, it will pick up only quite loud noise. When you start to speak, there is a slight delay before the walkie-talkie starts 2 seconds the transmission will be cut off. VOX operation is not recommended if the PMR will be used in a noisy or windy environment. Select the sensitivity (3 Levels) using the up/down keys and confirm by pressing the PTT button. When the Scan function is turned on, the handset will continuously scan through all eight channels until it finds one on which another user is transmitting. When a signal is detected the unit will pause. With this function activated the handset will continuously scan through all subchannels (CTCSS) for the preset channel until it finds one on which another user is transmitting. When a signal is detected the unit will pause. With this function activated the handset will continuously scan through all DCS channels for the preset channel until it finds one on which another user is transmitting. When a signal is detected the unit will pause. [. . . ] All deficiencies resulting from material or production faults which occur during the period of guarantee will be eliminated free of charge. Rights to claims under the terms of guarantee are annulled following intervention by the purchaser or third parties. Damage caused as a result of improper handling or operation, incorrect positioning or storing, improper connection or installation, Acts of God or other external influence are not covered by the terms of guarantee. in the case of complaints , we reserve the right to repair or replace defect parts or provide a replacement device. [. . . ]