User manual AUDIOLINE TEL18

[. . . ] Disposal If the useful life of the complete equipment has expired, please dispose of these carefully in accordance with the statutory requirements and in a manner friendly to the environment. Temperature and ambient conditions The telephone is designed for use in protected rooms with a temperature range of -10 °C to 50 °C. The unit must not be installed in damp rooms such as a bathroom or laundry room. Avoid proximity to sources of heat such as radiators and do not expose the unit to direct sunlight. [. . . ] Incoming calls are accepted by lifting the receiver and are ended by replacing the receiver. If a connection that you have dialled is engaged or you were unable to get through to anybody, simply replace the receiver. The last number dialled with a maximum of 31 digits will be saved in the telephone automatically. The saved redial number will now be dialled. You can switch off the microphone during a call using the mute button, . It is thus possible to speak without the other party hearing you. The loudspeaker remains switched on and you can continue to hear the other party. To mute the microphone, press the mute button once while a call is To switch the microphone on again, press the mute button once more. The indicator light will go out and you will be able to continue your call as normal. You can use the slide switch underneath the telephone to select the settings (loud) or (soft) to adapt the ringer volume to your requirements. Should you not want to be disturbed, use the (off) position. - Storing telephone numbers 5 Storing telephone numbers You can store 13 numbers in your telephone. Three numbers can be stored under the direct dial buttons M1, M2 and M3 and 10 additional numbers under the speed dial buttons. The numbers 0 to 9 on the number pad are used as speed dial buttons. Now press one of the three direct dial buttons M1, M2 or M3. Enter the required telephone number with a maximum of 16 digits using the number pad. Note: If you enter the wrong number, you can break off the process at this point by replacing the receiver. Replace the receiver to complete the save procedure. Saving numbers under the speed dial buttons Now select a speed dial storage location by pressing a number between 0 and 9 on the number pad. Enter the required telephone number with a maximum of 16 digits using the number pad. Note: If you enter the wrong number, you can break off the process at this point by replacing the receiver. Replace the receiver to complete the save procedure. [. . . ] Exchanged parts or exchanged equipment become our property. Claims for compensation are excluded insofar as they do not relate to criminal intent or gross negligence on the part of the manufacturer. All guarantee claims according to these conditions must be raised exclusively with your dealer. Rights under the guarantee can no longer be enforced after the expiry of 24 months from purchase and delivery of our products. [. . . ]