User manual AUDIOLINE VR R40

[. . . ] The wrong polarity can damage both the battery and the unit. Note: When the battery become weak and need to be replaced, the battery symbol will flash in the display. Never change the battery while recording as otherwise a total loss of data could occur. 1 2 3 4 5 6 7 8 9 10 11 Repeat Icon Battery capacity indicator Hold Appears in Long Play Mode (LP) and Standard-Modus (SP) Appears during recording Appears if VOS is on Minutes and Seconds Dynamik Operation Icon Memory indicator Recording time for Playback and Remaining time Memo number indicator from 1 to 99 in the selected archive file 12 Selected archive file indicator A, B, C, D Ensure that the HOLD slide switch on the righthand side has not been moved to the top position. [. . . ] Notes: If you want to fast forward or rewind a long memo, and . Please use the buttons button enables to repeat a required certain mesThe FILE/ sage continuously. If you want to find a particular memo within an archive file, you can use the SCAN function. Here, only the first 5 seconds of the memo are played back before switching automatically to the next memo. To do this, press the multi switch The display shows SCAN. The SCAN function always starts from the number currently set. When you have found the right message, press the multi once more to hear this memo in its entirety. To select a different memo, use the buttons and . If you want to search quickly within the archive file, hold the or until you see the required number in the display. You can change automatically to the previous or next memo while you are listening to a memo. First select the message that you want to erase. If however you want to break off the erasing process, press any button other than the ERASE button. First select the required file A, B, C or D that you want to erase by using the FILE button. Now press both the REC and ERASE buttons simultaneously for three seconds. If however you want to break off the erasing process, press any button other than the ERASE button. Press FM/MODE button more then 1 seond and the VR R40 will be changed to the radio. Earphone will be used as FM antenna, when the user listen to the radio by earphone. During speaker playback the IN connector can be used as antenna by connecting the earphone to the IN connection. Button, then the unit will search a radio station from Press 88MHz. If you want to listen to the next station, press the button again. After reaching the last radio station at 108 MHz, press the button to search down-wards. The HOLD slide switch can be found on the right-hand side of the unit. [. . . ] Claims for compensation are excluded insofar as they do not relate to criminal intent or gross negligence on the part of the manufacturer. All guarantee claims according to these conditions must be raised exclusively with your dealer. Rights under the guarantee can no longer be enforced after the expiry of one year from purchase and delivery of our products. In the case of unnecessary or unjustified demands on the customer service department, we will levy our usual service charges for materials, time, postage and packing. [. . . ]