User manual AUDIOVOX 128-7112

[. . . ] Model D1750T PORTABLE 7" LCD MONITOR AND DVD PLAYER Owner's Manual INTRODUCTION Thank you for choosing the 7" portable DVD player. The unit applies the latest state of the art electronics and is designed for use in hotels, offices or your home. The DVD Player is constructed to provide years of reliable, trouble-free service, and is compact so that you can take it with you anywhere and is designed for quick and easy setup. Please read all documentation prior to using this product. [. . . ] The Bag/Mount is easy to attach to a headrest and fits on most vehicle headrest types. This is convenient for the rear seat passengers to view the screen. - 18 - POWER SUPPLY Charging the Battery Pack The battery must be attached to the DVD player to charge it. Plug the Power Adapter into the Player's DC-IN 12 V Jack, which is located on left Side of the DVD Player. Plug the other end of the Power Cord into a wall Outlet. Detaching The Battery Pack If the DVD Player is not going to be used for long periods of time, the Battery Pack should be detached. When the DVD Player is turned OFF, the DVD Player is still consuming some power in STANDBY mode. This could lead to discharging the battery. Make sure the power is turned OFF before detaching the Battery Pack. After detaching the battery pack, take care when handling the DVD Player. 1) Place the player on a soft and smooth surface with its back cover up to avoid scratching the screen. 2) Press the button located on the backside of the unit to unlock the battery pack and while pressing the button pull the battery pack out from the DVD Player. NOTE: When attaching or detaching the battery pack, make sure to protect the LCD screen. - 19 - POWER SUPPLY Using a Vehicle DC Adapter To use the Vehicle DC Adapter disconnect the Battery pack and connect the supplied Vehicle Power Plug Adapter into the DVD Player's Power Jack and the other end into the Vehicle DC outlet (Cigarette Lighter Socket) as shown below. Note: Do not operate the unit or view video software while driving a vehicle. Place the unit in a secure position for viewing. Do not leave battery attached when using car adaptor as power source. Make sure the unit and the car adapter are not connected when starting the car. DVD PLAYER OPERATION Read all instructions carefully before using your DVD Player for the first time. Preparation Turn the DVD Player ON by pressing the POWER button on the front of the player. Load disc with the label outward playback of the disc will begin automatically. Playback of DVD Disc When the DVD menu appears press the direction buttons ( select a feature. ) to Pause Press the Play/Pause button once on remote control to pause playback. Press the Play/Pause button again to resume normal playback. Zoom Press the ZOOM button on the remote control to cycle through the different zoom settings. While in zoom mode use the direction buttons to move around to different positions on the picture. - 20 - Stop During playback, press the STOP button once on the remote control to stop playback of a disc. Press the PLAY/PAUSE button again, and the DVD Player will resume playback of the disc from the point where it stopped. Screen Mode Press the PIC button on the front panel for three (3) seconds to shift the screen aspect ratio between 16:9, 4:3 and OFF. (NOTE: OFF Mode can be used to turn the screen OFF when the unit is attached to an external monitor or when listening to CD's. ) Title Menu To view the Title Menu during payback of a disc press the TITLE button on the remote control. Press direction button ( ) or the number buttons to select the title or disc option you wish to play. (NOTE: This feature is not available on all discs. ) Press the ENTER button to start playback of a disc. NOTE: Title and Menu are only available for DVD discs. Previous and Next Press the PREV button two (2) times repeatedly on the remote control, and playback will start from the previous track. Press the NEXT button on the remote control and playback of the disc will start from the next track. SYSTEM SETUP Setup Menu You can change the default settings to your own preference. [. . . ] · Make sure you are pointing the remote control at the DVD Player. · Make sure batteries are inserted correctly (check polarity). · Cannot continue to play or plays a section repeatedly. There is no sound when using wireless headphone The remote control does not work. WARNING: Do not touch any metal objects to the Battery connectors, as it will put the Battery in standby mode. To exit the standby mode, connect the Battery and DVD Player to AC or DC power. [. . . ]