User manual AUDIOVOX 1285120

[. . . ] Tune the radio to either 88. 7 or 89. 1 MHz. (depending on the frequency to which the installer has set the unit) or push the pre-set memory pushbutton that has been set as per the above description. Turn on the changer system by pressing the Play/Pause button on the commander. The display panel on the commander will illuminate and play of the first disc in the magazine will begin. [. . . ] The pause indication will be shown on the LCD panel and the disc symbol will stop rotating and flash instead. Press the button again to resume play of the disc. NOTE: If left in the PAUSE mode for 5 minutes, the unit will automatically shut off. 1 2 4 56 3 2 7 2 in a random, shuffled order. The Track Select will also select tracks in the shuffled order instead of the normal progression. The Track Shuffle mode can be cancelled by pressing the Shuffle button again, or by activating the Scan or Repeat functions. When the Shuffle button is pressed and held longer than 2 seconds, the "SFL" and "DISC" indications will appear on the LCD panel and the discs in the magazine will be played in a random shuffled order, as well as the tracks on each disc. When all the tracks on the selected disc have been played, the next disc will be selected in shuffled order and its tracks will be played in shuffled order. The Disc Shuffle mode can be cancelled by pressing the Shuffle button again, or by activation the Scan or Repeat functions. 5function 9 7 8 disappear from the display). Track Scan mode will be cancelled by activating any other function (Repeat, Shuffle, Disc Select, Track Select, or Track Search). When the Scan button is pressed and held for longer than 2 seconds, the "SCN" and "DISC" indications will appear on the LCD panel and the first 10 seconds of the first track of each disc in the magazine will be played. When the desired disc is reached, press the Scan button again and play of that disc will continue ("SCN" and "DISC" will disappear from the display). Disc Scan mode will also be cancelled by activating any other function (Repeat, Shuffle, Disc Select, Track Select, or Track Search). 9 8 blsensor for the infrared signal from the optional wireless remote REMOTE SENSOR The bmRESETBUTTON on the front panel of the wired commander A reset button is located control is located behind this lens. For optimal operation of the remote control, keep the lens clean and do not allow objects to block it. 8 TRACK / DISCbutton is pressed, the indication "RPT" will REPEAT (RPT) When the Repeat 7 9 which must be activated with a pen or other thin object as it is recessed to prevent accidental engagement. The reset circuitry is provided to protect the unit's microprocessor and laser pick-up system and should only be activated under the following circumstances: 1. Initial installation after all wiring is completed. If abnormal disc operation is encountered, the reset button may be pressed to clear the system and return to normal operation. TRACK / DISC SCAN (SCN) When the Scan button is pressed, the indication "SCN" will appear CAUTION: Avoid use of Reset buttons after initial use unless you on the LCD panel and the first 10 seconds of each track on the disc have a definite abnormal disc operation. When a desired track is reached, press the EJECT button on the changer to remove the CD Scan button again and play of that track will continue ("SCN" will 3 magazine for normal operation. appear on the LCD panel and play of the selected track will be continuously repeated until the Track Repeat mode is cancelled by pressing the Repeat button again or by activating the Scan or Shuffle functions. When the Repeat button is pressed and held longer than 2 seconds, the "RPT" and "DISC" indications will appear on the LCD panel and play of the selected disc will be continuously repeated until the Disc Repeat mode is cancelled by pressing the Repeat button again or by activating the Scan or Shuffle functions. 9 9 7 WIRELESS REMOTE CONTROL 9 2 3 8 7 SCN OFF CD 1 45 6 The CDC-10R Wireless Remote Control is capable of operating all functions of the wired commander. Each button on the remote control functions in the same way as the comparable button on the wired commander. For optimal operation of the remote control, always aim it toward the Remote Sensor on the wired commander. bl 1 PLAY / PAUSE ( / See Wired Commander 2 3 ) DISC TRACK 2 POWER OFF SWITCH (OFF) See Wired Commander RPT SHF 3 DISC SELECT (- +) See Wired Commander 4 5 6 7 ) 4 TRACK SELECT ( See Wired Commander 5 TRACK SEARCH FUNCTIONS ( BATTERY COMPARTMENT ) See Wired Commander 6 TRACK/DISC SHUFFLE (SHF) See Wired Commander 4 7 TRACK/DISC REPEAT (RPT) See Wired Commander 8 9 NOTES ON REMOTE CONTROL USE: The remote control operates on a 3 volt lithium battery (type CR-2025). Install the battery into the compartment at the bottom of the remote control, making sure to observe correct polarity (match "+" side of battery to "+" indication on compartment). [. . . ] Check all wiring and correct as necessary. If sound from second disc is OK, first disc is defective. Clean disc Set the mounting angle adjustment to the correct position as per the installation instructions of the CD changer. Incorrect connection Magazine cannot be installed CD is not played Noise, skipping, or intermittent sound during playback. Magazine is inserted in wrong direction Disc is loaded incorrectly in magazine Scratches on disc or warped disc Extremely dirty disc Mounting angle adjustment is not correct 6 36 MONTH LIMITED WARRANTY Applies to Compact Disc Changers AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 36 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor. [. . . ]