User manual AUDIOVOX 1285867

[. . . ] OWNER'S MANUAL ACD-21 AM/FM/MPX RADIO WITH DETACHABLE FRONT PANEL, COMPACT DISC PLAYER AND QUARTZ CLOCK INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. [. . . ] This control is used to mute the volume from the system. When the ATT button is pressed, the indication ATT appears on the display panel and the volume will be muted. Pressing the button for longer than 2 seconds will activate the Auto-Store Tuning feature. The radio will automatically scan the band in use and enter strong stations into the pre-set memory positions for that band. If you have already set the pre-set memories of that band to your favorite stations, activating the Auto-Store Tuning feature will erase those stations and enter the new strong stations. This feature is most useful when traveling in a new area where you are not familiar with the local stations. STATION PRE-SET MEMORIES To set any of the 6 pre-set memory buttons, use the following procedure: 1. Turn the unit on and select the desired band. Select the first station to be pre-set using the Manual Up/Down or Up/Down Seek Tuning functions 3. Press the pre-set button to be set and continue to hold the button in. The pre-set number will appear on the display panel. The station is now set into the memory of that pre-set button and can be re-called at anytime by momentarily pressing that button. Repeat the above procedure for the remaining 5 pre-sets on the band in use and for the other 4 bands of the unit. bo bm. bn 7 LIQUID CRYSTAL DISPLAY PANEL The Liquid Crystal Display (LCD) panel displays the frequency, time, and activated functions. NOTE: It is a characteristic of LCD panels that, if subjected to cold temperatures for bp OPERATING INSTRUCTIONS an extended period of time, they may take longer to illuminate than under normal conditions. In addition, the visibility of the numbers on the LCD may slightly decrease. The LCD read-out will return to normal when the temperature increases to a normal range. DISC SLOT With the label surface facing up, gently insert the disc into the slot until the soft-loading mechanism engages and disc play begins. The indication and track number will appear on the display panel. NOTE: This unit is designed for play of standard 5" (12cm) Compact Discs ONLY. Do not attempt to use 3" (8cm) CD-Singles in this unit, either with or without an adaptor, as damage to the player and/ or disc can occur. Such damage will not be covered by the Warranty on this product. next higher track number will be selected as shown on the display panel. Similarly , each time the Backward Track Select ( ) side of the button is pressed, the next lower track number will be selected as shown on the display panel. bq bt CUE/REVIEW FUNCTIONS ( / ) During disc play, high-speed audible search to any section of the disc can be made by the Cue and Review functions. [. . . ] l The unit is designed with a vibration dampening CD mechanism to minimize interruption of disc play due to normal vibration in a moving vehicle. When driving on very rough roads, however, occasional sound skips may occur. This will not scratch or damage the disc and normal play will resume when the rough conditions cease. HANDLING COMPACT DISCS Dirt, dust, scratches, and warpage can cause skips in the playback and deterioration of sound quality. Please follow these guidelines to take care of your compact discs: l Use only compact discs with the mark . [. . . ]