User manual AUDIOVOX 1285987

[. . . ] ' In-Dash Single Disc DVD/CD Player Before operating the unit, please read these instructions carefully 128-5987 Operating Instructions Welcome Thank you for purchasing this DVD/CD player. Before operating the unit, please read this manual thoroughly and retain it for future reference. IMPORTANT NOTES To prevent an electrical system short which could cause serious damage to the unit, the vehicle, or cause personal injury, please follow the safety recommendations below: · Should there be requirement to replace a blown fuse, remember to first disconnect all power and switch off the unit before fuse replacement. Use a fuse with the correct rating to avoid damaging the unit. During operation, if the unit overheats or the system malfunctions for some reason, switch off the unit and consult your dealer immediately. [. . . ] · Perform steps 1 to 3 as outlined in paragraph 3. 2; the menu will be displayed on the TV monitor. 4) Press the numeric buttons to select the preferred track. 5) Press the RETURN button to stop the playback and return to the Menu screen. NOTE: The play details in the menu will vary depending on the disc in question. The basic operations to play Video CD having PBC (Playback Control) consist of the following: · NEXT TRK - To go to the next menu (if available) or next track. · PREV TRK - To go to the previous menu (if available) or previous track. · RETURN- To return to the previous menu. 8 128-5987 Operating Instructions 3. 2. 2 Playback Video CDs with Playback Control Without Using Menus (VCD) 1) Press the MENU/PBC button to set PCB off. 2) "PBC OFF" will be displayed on the TV screen. 3) Press the required track number button to select the preferred track, or press the PLAY/PAUSE ( ) button to commence playback. To return to menu playback: 1) Press the MENU/PBC button: "PBC ON" will be displayed on the TV screen. 2) The menu (if available) will be displayed on the TV monitor. 3. 3 Fast Forward or Reverse (CD/VCD/DVD) 1) Press the F. FWD ( ) button during playback. Each time this button is pressed, the unit will go into a rapid advance playback mode. The following OSD will be shown on the TV screen, depending on the speed of the playback selected: Audio CD Playback FAST FW PLAY Video CD/DVD Playback FAST FWX2 FAST FWX4 FAST FWX8 PLAY FAST FWX32 FAST FWX16 2) Press the F. REV ( ) button during playback. Each time this button is pressed, the unit will go into a rapid reverse playback mode. The following OSD will be shown on the TV screen, depending on the speed of the playback selected: CD Playback FAST BW PLAY VCD/DVD Playback FAST BWX2 FAST BWX4 FAST BWX8 PLAY FAST BWX32 FAST BWX16 9 128-5987 Operating Instructions 3. 4 Next track or previous track (CD/VCD/DVD) Press during playback. Audio CD and Video CD: The player will skip forward to the next track each time the button is pressed. "SKIP FW" will be displayed on the TV screen. DVD: The player will skip forward to the next title/chapter each time the button is pressed. "SKIP FW" will be displayed on the TV screen. Press during playback. Audio CD and Video CD: The player will skip to the beginning of the current track each time the button is pressed. The player will skip to the beginning of the previous track when the button is pressed twice consecutively. "SKIP BW" will be displayed on the TV screen. DVD: The player will skip to the beginning of the current chapter each time the button is pressed. The player will skip to the beginning of the previous chapter when the button is pressed twice consecutively. [. . . ] e) Use the RETURN button to return to the previous menu, or press the SETUP button to exit. 17 128-5987 Operating Instructions (2) Password NOTE: The factory default password is 1234 a) During STOP, press the SETUP button, the setup menu will appear. buttons or numeric key to select the PASSWORD item, then press the b) Use the / ENTER button. The change password menu will appear. CHANGE PASSWORD PARENTAL PASSWORD c) Use the numeric keys to enter the password; then press ENTER. d) If the correct password is entered, the user can now enter the new password. CHANGE PASSWORD NEW PASSWORD If the incorrect password is entered, the previous menu will be shown. [. . . ]