User manual AUDIOVOX 1286158

[. . . ] MANUAL OWNER'S MANUAL PWR LOUD SEL 4x40 WATTS 1 REL CDC OLUME V + 5 2 3 TUNE 5 DISC TRK 4 AS/PS DISC SEL ACC-60 BAND AUX MO/AUX 1 SCN 2 RPT 3 4RDM 5PGM 6MEM CLR T/F CLK ACC-60 AM/FM/MPX RADIO WITH FOLD-DOWN DETACHABLE FRONT PANEL, 5-DISC COMPACT DISC PLAYER AND QUARTZ CLOCK INSTALL ALLA INSTRUCT INSTALL AT ION INSTRUCT IONS INSTALLATION INSTRUCTIONS This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. [. . . ] Pause mode will also be canceled by activating any other disc function. 5 3 4 cn REPEAT A - B SELECTOR (RPT A -B) the display panel). Play of the track will continue to repeat until the button is pressed again and the RPT indication disappears from the display panel. Repeat Play mode will also be canceled by activating the Track Scan or Random Play functions. bu CUE/REVIEW FUNCTIONS ( /) The Track Select functions are used to quickly access the beginning of a particular track. Each time the Forward Track Select ( ) button is pressed, the next higher track number will be selected as shown on the display panel. Similarly, each time the Backward Track Select ( ) button is pressed, the next lower track number will be selected as shown on the display panel. /) High-speed audible search to any section of the disc can be made by the Cue and Review functions. Press and hold the Cue button ( ) to advance rapidly in the forward direction or the Review button ( ) to advance rapidly in the backward direction. During either function, the elapsed time within each track will automatically be shown on the display panel. co RANDOM PLAY SELECTOR (RDM) The Repeat A - B function is used to select a section of the disc other than a complete track to be repeated. Press and hold the button at the beginning of the section that you wish to have repeated (RPT and A will appear on the display panel). Allow the disc to play to the end of the section that you wish to have repeated and then press and hold the button again (the A on the display panel will change to a b). The selected section will be played repeatedly until the function is canceled by pressing the RPT A-B button again or activating any other disc function. cl cm During disc play, press this button to play the tracks on the disc in a random shuffled order (RDM will appear on the display panel). In Random Play mode, the Forward Track Select ( ) will also select tracks in the random order instead of the normal progression. Backward Track Select ( ) will go back to the beginning of the track in play if it has played longer than 5 seconds or to a random track if it has played less than 5 TRACK SCAN SELECTOR (SCN) seconds. The Random Play mode can be During disc play, press this button to play the first canceled by pressing the button again 10 seconds of each track on the disc in play (SCN ( RDM indication will disappear from the will appear on the display panel and the track num- display panel). When a desired track is reached, press the Track Scan button again to cancel the MEMORY/CLEAR SELECTOR (MEM/CLR) function and play of the selected track will con- Up to 18 tracks can be programmed for play tinue. Track Scan mode will also be canceled by in any order you select. The following proactivating the Repeat Play or Random Play func- cedure is used to program the order of track tions. play: TRACK REPEAT PLAY SELECTOR (RPT) 1. Select a disc in the unit to begin disc play. During disc play, press this button to repeat the 2. Select the first track to be programmed play of the selected track (RPT will appear on using the Track Select buttons cp 9 OPER AT ING INSTRUC T IONS OPERA INSTRUCT cq If an portable audio device, is connected to the Left and Right auxiliary input jacks, this source can be selected for play through the radio by pressing the AUX button. When the button is pressed, A --in appears on the display panel. [. . . ] The unit is designed with a vibration dampening CD mechanism to minimize interruption of disc play due to normal vibration in a moving vehicle. When driving on very rough roads, however, occasional sound skips may occur. This will not scratch or damage the disc and normal play will resume when the rough conditions cease. HANDLING COMPACT DISCS Dirt, dust, scratches, and warpage can cause skips in the playback and deterioration of sound quality. Please follow these guidelines to take care of your compact discs: ! [. . . ]