User manual AUDIOVOX 1286408

[. . . ] PLEASE READ THE INSTRUCTION CAREFULLY BEFORE OPERATING THIS UNIT. WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture. IMPORTANT Since the CD circuitry may cause interference to other radio tuners nearby, switch this unit off when not in use or move it away from the affected radio tuner. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. [. . . ] Press the OPEN button to open the CD compartment lid. Adjust the VOLUME to desired the sound level. Insert the disc with the label side facing up. Close the lid securely until a click is heard. Press the PLAY button to start playing. Current track Total track Elasped time for current track No Disc To Emphasize the bass sound BASS BOOST Set the BASS BOOST switch to the ON position. ON OFF Note: The bass boost performance will be dependant on the VOLUME control setting. - During play or stop mode, by sliding this switch, a <BASS ON> or <BASS OFF> message will be displayed. HOLD Switch · This switch prevents accidental selection of an unwanted HOLD function during playback or stop mode. In the HOLD "ON" position, no function button on the unit can operated (except OPEN). Moving the switch to the "OFF" position, the unit returns to normal operation. · During play or stop mode, by sliding this switch, a <HOLD ON> or <HOLD OFF> message will be displayed. · If the player is turned on when the HOLD feature is activated, the screen will display a <KEY HOLD> and <Good Bye> message. The unit will then power down automatically. Turning Power on and off This unit has no ON/OFF switch. To turn on and off, press the following buttons. To turn on: Press PLAY/PAUSE (playback starts). To turn off: Press STOP button once to standby mode. If press STOP button twice, it will turn off the power immediately. Auto power-off function When the unit is stopped (standby mode) for approximately 30 seconds, the power is automatically turned off. 6 No Disc · If no disc < NO DISC !> Good Bye Good Bye POWER OFF POWER OFF · Other un-recognized CD format discs. < NO TRACK > < NO TRACK > NOTE: On rare occasions, the unit may display <Can Not Read> or <READING DISC> or other messages. This condition is caused by a CD with an unrecognized format. [. . . ] · Dust or Dry Particles Using a camera lens brush/blower, blow on the lens couple times, then wipe it lightly with the brush to remove dust. · Fingerprints If the lens cannot be cleaned by using a brush/ blower, use a dry cotton swab starting in the middle and working to the outside edge. * NAVIGATION 2. BY ALBUM - Press PLAY/PAUSE button to confirm desired Album. - Press MENU UP or MENU DOWN button to display different tracks under same album. [. . . ]