User manual AUDIOVOX 1286649A

[. . . ] MANUAL OWNER'S MANUAL INSTALLA ALLATION AND INSTALLATION GUIDE CAR COMPACT DISC PLAYER/RECEIVER SUB A ACD-28A AM/FM/MPX RADIO WITH DETACHABLE FRONT PANEL COMPACT DISC PLAYER, CD CHANGER CONTROLS AND QUARTZ CLOCK INSTALL ALLA INSTRUCT INSTALL AT ION INSTRUCT IONS INSTALLATION INSTRUCTIONS This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. [. . . ] Scan mode will also be canceled or Shuffle by activating the Repeat Play functions. Play disc play will be suspended; the center of the ) will stop rotating, indicating disc disc icon ( pause. When the button is pressed again, S--PAUSE will disappear from the display and play will resume from the point at which pause occurred. DISC EJECT ( ) Disc play is stopped and the disc is ejected when this button is pressed. Radio or CD changer operation will automatically resume depending on which mode was in operation prior to disc play. If the disc is not removed from the unit within 15 seconds of being ejected, it will automatically be re-loaded into the unit to prevent it from being ct cq cp, cq REPEAT PLAY SELECTOR (RPT) During disc play, press this button to repeat the play of the selected track (S--RPT will appear on the display panel). Play of the track will continue to repeat until the button is pressed again and the S--RPT indication disappears from the display panel. Repeat Play mode will also be canceled by activating or Shuffle Play functions. the Track Scan co cq cr cp SHUFFLE PLAY SELECTOR (SHF) During disc play, press this button to play the tracks on the disc in a random shuffled order (S--SHF will appear on the display panel). In Shuffle Play mode, the TRACK Select function will also select tracks in random order instead of the normal progression. The Shuffle Play mode can be canceled by pressing the button again (S--SHF indication will disappear from the display panel) or by activating the Repeat Play or Track Scan functions. cu will appear on the accidentally damaged ( display panel to indicate that a disc is loaded in the player). Play of the disc can be resumed by using to choose the CD player the MODE button function. cu co DISC SELECT UP/DOWN (UP/DN) These buttons are used to select the desired disc for play during changer operation. To advance to a higher number disc, press the UP button, and to return to a lower number disc, press the DN button. The number of the disc in play will be shown on the display panel. DISC PAUSE (PAU) When this button is pressed during disc play, S--PAUSE will appear on the display, and dl MODE SELECTOR (MODE) During radio or tape play, press this button to select operation of the optional CD changer as shown by CDC, the disc number and the track number on the display panel. Refer to the CD Changer Controls section for specific operating instructions. If the button is pressed when no CD changer is connected to the unit, no CDC indications will appear on the display panel. The unit will then return to radio operation. To return to the disc play operation (if a compact disc is loaded in the unit), press the button again. During disc play, press this button to change to radio operation without ejecting the disc. SUB-WOOFER SELECT When the SUB-WOOFER button is pressed, the sub-woofer audio output, via the single RCA connector on the green wire, is made available to an optional sub-woofer speaker, if installed in the vehicle. 10 cs dm OPER AT ING INSTRUCT IONS OPER AT ING INSTRUCT IONS A T OPERAT ING INSTRUCT IONS OPER AT ING INSTRUCT IONS TIME/FREQUENCY SELECTOR (T/F) Pressing the Time/Frequency (T/F) button will display the time of day for 5 seconds, after which the display will automatically return to the radio, tape or CD changer display, depending on which one was currently active. To set the correct time of day, refer to the procedure for Setting the Clock. NOTES ON USE OF FRONT PANEL 1. [. . . ] Should this occur, the player will not operate properly until the moisture has evaporated. The unit is designed with a vibration dampening CD mechanism to minimize interruption of disc play due to normal vibration in a moving vehicle. When driving on very rough roads, however, occasional sound skips may occur. This will not scratch or damage the disc and normal play will resume when the rough conditions cease. HANDLING COMPACT DISCS Dirt, dust, scratches, and warpage can cause skips in the playback and deterioration of sound quality. [. . . ]