User manual AUDIOVOX AVP-8280

[. . . ] VIDEO CASSETTE PLAYER MODEL AVP-8280 OPERATING INSTRUCTIONS CAUTIONS AND WARNINGS To obtain the best results and to avoid malfunctions, PLEASE READ CAREFULLY THE DESCRIPTIONS AND OPERATING PROCEDURES CONTAINED IN THIS OWNER'S MANUAL PRIOR TO OPERATING THE VIDEO CASSETTE PLAYER. This user manual employs the following symbols to indicate different types of warning messages. Indicates a warning or notice regarding product operation. Indicates the presence of important operating and maintenance (servicing) instructions. Indicates the presence of un-insulated dangerous voltage within the unit enclosure. CAUTION RISK OF ELECTRIC SHOCKS DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER. [. . . ] The tape will play to the end, rewind to the beginning and play again. When this function is enabled, all control functions are disabled. 2 AUDIO/VIDEO IN Jacks Connect these jacks to the audio/video out jacks terminal of your Game machine or Camcorder using the RCA cord provided. 9 CONTROLS AND INDICATORS (CONTINUED) REAR PANEL !Infrared (IR) INPUT Connector This connector provides a two-wire interface with various Audiovox IR products such as VOH-681/682. (P/N 136B1864) * Connector description @ DC 12V Jack When using a DC power source, connect this jack to 12V DC. * Connector description 10 CONTROLS AND INDICATORS (CONTINUED) # AUDIO/VIDEO OUT Connectors These connectors provide an interface to the AUDIO/VIDEO IN connectors of your video monitor, using an RCA cord. $ AUDIO/VIDEO IN Connector These connectors provide an interface to the AUDIO/VIDEO OUT connectors of your Game machine or Camcorder using an RCA cord. % Infrared (IR) INPUT Connector (3. 5mm jack) This connector provides a three-wire interface with receiver accessory. (P/N 136-B2129) CAUTION: This VCP is for 12Vdc use only; DO NOT use in 24Vdc vehicles. If you use this unit in a 24Vdc vehicle, all the indicator lamps will blink indicating a major malfunction. Disconnect the plug from the power source immediately. 11 CONTROLS AND INDICATORS (CONTINUED) REMOTE CONTROL Turns the VCP on and off. Use this button to eject the cassette tape from the VCP. In STOP mode use this button to select between Video 1 and Video 2 inputs. In PLAY mode use this button to adjust the tracking. In STOP mode use this button to rewind the tape. In PLAY mode use this button to view the tape in reverse. In STOP mode use this button to start tape play. In PLAY mode use this button to enable the Auto Tracking function. In STOP mode use this button to fast forward. In PLAY mode use this button to view the tape in forward. Use this button to pause the tape while playing. Use this button to view the tape in slow motion. Use this button to select between Video 1 and Video 2 inputs. [. . . ] · Check connector between VCP and TV. · Check connection(a). · Check cable/by pass or continuity test. · Clean head using tape cartridge cleaner. We recommend using cartridge with cloth or paper tape and cleaning drops included. [. . . ]