User manual AUDIOVOX AVR-1040

[. . . ] DV-T27N-SJ 99. 11. 26 5:3 PM ` A1 Video Cassette Recorder User's Guide AVR-1040 DV-T27N-SJ 99. 11. 26 5:17 PM ` A2 Safety information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. [. . . ] When the desired viewing mode is displayed, press MENU twice to exit. CHANNEL SET CLEAR Correct MENU Cancel 5 Press 1 if it is AM; press 2 if it is PM. TIME AND DATE SET Time Date 07:11 - 1=AM 2=PM - -/- -/- - 1 Auto Channel Search 2 Add/Remove Channels 3 Signal Type : CABLE 4 Cable Box Setup MENU Exit CLEAR Correct MENU Cancel Programming the channel memory The VCR's channel memory determines the channels that are visible when you press ­CH/TRK+. You can add or remove channels from memory. 6 Use 0-9 to enter the month, day, and year. The VCR will automatically adds the correct day of the week according to the date that is selected. 13 14 DV-T27N-SJ 99. 11. 26 5:3 PM ` 15 Setting up your VCR, continued Setting channels automatically (Auto Channel Search) Make sure that you use the auto channel search feature during daytime broadcast hours. If you use the auto channel search feature at late night, you may eliminate channels that air only daytime programming. 2 Press 3 to select Channel Set. CHANNEL SET Setting up your VCR, continued 3 Press 2 to select Add/Remove Channels. ADD/REMOVE CHANNELS Channel 06 is now ADDED. CLEAR Remove MENU Exit · Detect Automatically ;A strong cable or antenna signal in your area may cause Auto Detect to mis-detect. If this should happen, select 1 or 2 for the system you have. 4 Use 0-9 to enter the channel you want to remove. 5 Press CLEAR to erase the channel. ADD/REMOVE CHANNELS 1 Auto Channel Search 2 Add/Remove Channels 3 Signal Type : CABLE 4 Cable Box Setup MENU Exit Channel 06 is now REMOVED. DISPLAY Add MENU Exit 3 Press 1 to select Auto Channel Search mode and press 3 to detect the channel automatically and the scanning channel number appears. Wait until the channel numbers stop changing (one to two minutes), and one of the memorized channel appears. AUTO CHANNEL SEARCH 6 When you are finished removing channels, press MENU three times to exit from the menus. Now scanning channel 14 ANY KEY Cancel Adding channels to memory If you have removed a channel from memory, you can easily add it back again. To add channels: 1 2 4 Press ­CH/TRK+ to view the memorized channels. Removing channels manually To erase a channel manually, 1 Press MENU to display the menu. 2 Press 3 to select Channel Set. CHANNEL SET Use 0-9 to tune to the channel you would like to add. 3 Press 3 to select Channel Set. CHANNEL SET 1 Auto Channel Search 2 Add/Remove Channels 3 Signal Type : CABLE 4 Cable Box Setup MENU Exit 1 Auto Channel Search 2 Add/Remove Channels 3 Signal Type : CABLE 4 Cable Box Setup MENU Exit 15 16 DV-T27N-SJ 99. 11. 26 5:3 PM ` 17 Setting up your VCR, continued 4 Press 2 to select Add/Remove Channels. ADD/REMOVE CHANNELS Using video cassettes Audio-visual material may include works of copyright which must not be recorded without authorization of the copyright owner. Channel 06 is now REMOVED. DISPLAY Add MENU Exit 5 Press DISPLAY to add the channel. ADD/REMOVE CHANNELS Channel 06 is now ADDED. CLEAR Remove MENU Exit If you insert a video cassette without a safety tab into the VCR: ·After setting the timer recording program, " " will blink on the display panel in the power off mode and the VCR will automatically eject the cassette. · In the power on mode, the VCR will playback automatically If you insert a video cassette with a safety tab intact into the VCR: · After setting the timer recording program, the VCR will be stand-by mode in power off mode. Before you play or record on a video cassette tape, be certain to read this information on the proper care and use of video cassettes. Only use video cassettes that bear the VHS mark: . There are four types of video cassettes: T-60, T-90, T-120, and T-160. The amount you can record on a tape is dependent upon the tape speed at which you record. The table below lists the recording time(hours:minutes) for each tape type according to recording speed. Tape Type T-60 T-90 T-120 T-160 SP Mode (Standard Play) 1:00 1:30 2:00 2:40 EP Mode (Extended Play) 3:00 4:30 6:00 8:00 6 Press MENU three times to exit from the menus. Setting the Cable Box (Cable Box Setup) 1 Press MENU to display the menu. 3 Press 4 to process Cable Box setup CABLE BOX SETUP Protecting video cassettes from accidental erasure On what channel do you want to receive from the cable box? [. . . ] Picture quality during playback is poor. · Adjust the picture quality by pressing ­CH/TRK+. Picture does not appear when you attempt to play a video cassette. · Verify that the VCR indicator is lit on the front display. [. . . ]