User manual AUDIOVOX AVT-1940

[. . . ] UDIOVOX PECIALIZED PPLICATIONS, L. L. C. INSTRUCTION MANUAL 19" COLOR TELEVISION AVT-1940 The serial number is located on the rear of the set. For future reference, please copy the number here. Serial No. ________________________________ CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE RISK OF ELECTRIC SHOCK, NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. The lightning flash with the arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock. [. . . ] To quickly turn off the sound, press the MUTE button on the remote. The "MUTE" will appear on the screen, colored green. To return the volume to its previous level, press MUTE again. Chapter 3: Operating your TV- 11 Changing the TV's Channel Memory Your TV's channel determines the channels that are available using the ù CH ü buttons. You can add channels to this memory or remove them from memory. If a channel is removed from memory you can tune to it with the ù CH ü buttons. If there is just one channel memorized, then the Add/Delete Channels function will search the whole channels. But if there are two or more channels memorized, then the Add/Delete Channels function will search the memorized channels only. Use the number buttons to tune to the channel. Press the MENU button twice, then "Set Up" menu will display. Use the ù CH ü buttons to select "Add/Delete Channels", then use the ÿ VOL ÷ button to enter the Add/Delete Channels" process. If the channel is not in memory, then use the ÿ VOL ÷ button to delete the channel from memory. If the channel is in memory, then use the ÿ VOL ÷ button to delete the channel from memory. If you are going to delete another channel, press the ùCH ü buttons until desired channel is selected. Press the ÿ VOL ÷ button to delete the channel. Wait 10 seconds or press the MENU button four times to ex Displaying the Current Channel 1. To quickly see the current channel number and status, press DISPLAY button on the remote control The current channel number and status will be displayed. 12- Chapter 3: Operating Your TV Adjusting Video Settings You may wish to adjust the video settings (e. g. contrast or color) to obtain the most pleasing picture. With the TV on, press the MENU button, then the "video" menu will appear. The "settings" item will be selected. Use the ÿ VOL ÷ buttons to turn Settings to Preset or Custom. Use the ù CH ü buttons to select the video settings you wish to adjust. Descriptions of the video settings are on the next page. [. . . ] · Try another station, if the other station is OK, it may be a station problem. · Check that the antenna is connected, is in good working order, has no broken wires and is adjusted correctly. · See if anything is interfering with the antenna signal. · Make sure the TV is plugged in. [. . . ]