User manual AUDIOVOX AWM910

[. . . ] Press MUTE again to resume the previous volume level. 3. Liquid Crystal Display (LCD) The liquid crystal display (LCD) panel (3) displays the frequency, time and activated functions. Note: When subjected to cold temperatures for an extended period of time, LCD panels will take longer to illuminate and the display visibility may slightly decrease. Optimal LCD operation will return to normal when the temperature increases to a normal range. 4. [. . . ] The new alarm time will be saved five seconds after the last adjustment is made. Once a time is set, press ALARM ON/OFF (8b) to turn the alarm function on or off. 9. Speaker Output The three speaker output buttons (9) (SPK A, SPK B and SPK A+B) control speaker output from the radio. Press any of the three buttons to turn the corresponding speaker on or off. The red light above each button will illuminate when that speaker is turned on. 10. Reset Use a ballpoint pen or other thin metal object to press the reset button (10) under the following circumstances: after the completion of initial installation/wiring, if none of the function buttons work or if an error symbol appears in the display. 7 Tuner Operation 11. Select a Band Briefly press BAND (11) to change between two AM bands (AM1 and AM2) and three FM bands (FM1, FM2 and FM3). 12. Tuning Manual Tuning Briefly press the tune up (12a) or tune down (12b) buttons to tune the frequency one step higher or lower. Seek Tuning Press and hold the tune up or tune down buttons to automatically tune up or down to the next strong station. Tuner Operation 13 COMPACT DISC PLAYER PUSH 12a 12b 1 2 RPT 3 SCAN RDM 4 5 H 6 M PUSH PWR VOL ALARM SET ON/OFF 14 EQ T/F AUD RADIO CD COMPACT MUSIC SYSTEM 11 AUX IN MUTE AUX BAND CD SPK A SPK B SPK A+B JENSEN AWM910 8 AWM910 13. Preset Stations Store Preset Stations Six numbered preset buttons (13) store and recall stations for each AM and FM band. To store a station, select a band (if needed), then select a station. The current station will be stored, and the corresponding preset number will appear in the display. Recall Preset Stations To recall a station, select a band (if needed). Press a preset button momentarily, and the unit will tune to the corresponding stored station. 14. Equalizer Selector The equalizer function applies preset sound effects to the unit's audio output signal. Press EQ (14) to step through the following equalizer options: Rock, Pop, Classic and USER. The equalizer options will appear in the display as they are accessed. The Bass and Treble settings will be saved in USER mode. 15. Headphone Operation The headphone output is wired to the "A" speaker and is active when either "A" or "A & B" speaker button is active. To use this feature, plug the headphones in to the 1/4" jack (15) and adjust the volume to the desired level. When the headphones are plugged in, the speakers are automatically disabled. 9 CD Operation 16. Insert and Eject CD Insert CD Press PUSH (16) to open the CD door. Close the CD door. Eject CD Press PUSH again to open the CD door and stop CD play. 17. Play Press CD (17) to begin disc play. 18. Pause Press the play/pause button (18) to suspend and resume disc play. 19. [. . . ] 3. 5 lbs. (1. 7 Kg) FM Tuner Tuning range . Audio CD, CD-R, R/W Amplifier Output Power . 2/4 Speaker and Headphone System Output Impedance . Compatible with 4-8 Ohm Speakers, 4 Ohm Load Minimum Total system power . [. . . ]