User manual AUDIOVOX CDM-3000XL Operation Manual

[. . . ] AUDIOVOX CDM-3000/CDM-3000XL Dual Mode CDMA/AMPS Handheld Portable Cellular Telephone Congratulations. . . You have just purchased one of the most advanced cellular telephones in the market today. Your new Audiovox portable telephone is a dual mode cellular telephone operating in both the standard analog and the CDMA "digital" modes. CDMA technology is a superior digital technology that greatly increases the quality and capacity of the cellular system and will provide you with enhanced features and services. [. . . ] The second linked number will be sent in TouchToneTM signals. Succeeding numbers can be sent again. Voice Mail Dialing You can store one set of linked numbers in a specially provided memory, and access these numbers with one touch of the "Voice Mail Access" key · . To Store the Voice Mail Access Number Please see "To Store Linked Numbers in Memory" and follow the steps 1 ~ 3 to make a set of linked numbers. Up to 80 digits of linked numbers can be stored including link mark " = ". You can also add a Name Tag (up to 24 characters) with your voice mail number. To Call Your Voice Mail Press and hold Press . The first number will be displayed and dialed. . The second number will be displayed and sent in Touch ToneTM signal. . The succeeding numbers can be sent sequentially by pressing · 1. 3. To Review the Contents of Press Press Press one or more times to select the Repertory Memory Search Mode. The first linked number in will be displayed. . (one or more times) to display the remaining linked numbers in Convenience Features Speed Dialing If you know the phonebook address of the telephone number that you want to call, you may place a call without using . Enter the one or two digits of your phonebook address (1-9 or 10-99). " " will light, and the call will be placed. Alert Pattern Selection This feature permits you to select an alert tone pattern from four options. 1. Press . 2. Press or to select the alert tone. 3. Press to set. Automatic Answering With this feature on, incoming calls will be automatically answered after a preset duration of alert tones. This feature may be convenient when your telephone is installed in the handsfree car kit. 1. Press . 2. Press or to select the numbers of alert tones before the incoming call is answered. Press to set. Note: This feature will not function if the phone is in "Phone Lock", or "Keypad Lock" mode. Automatic Retry With this feature on, your telephone will automatically make up to seven call attempts when the first try is not successful. The " " indicator will stay on, and the speaker will be muted. Press to cancel the Automatic Retry. 1. Press . 2. You can turn this feature on/off by or . 3. Press to set. Power On Message This feature allows you to create a message which will be displayed every time your phone is turned on (your name, greeting etc. ). A maximum of 36 characters can be stored as a message. 1. Press . 2. 4. Enter the three-digit security code. (See the Alpha Mode) When the message entry is complete, press . [. . . ] If unable to find an acceptable preferred channel, the phone switches to scan the non-preferred channels. · Home Only Mode You can place or receive calls only within your home area. · Preferred System Only The phone will scan the preferred system only and prevents switching over to the non-preferred system. · Non-preferred System Only Mode The phone will scan the non-preferred system only. SID Management (Analog Mode Only) Cellular systems are identified by a number called System Identifier or SID. [. . . ]