User manual AUDIOVOX CE156MP

[. . . ] Portable MP3 CD Player · Do not place any heavy object on top of the unit. · When the unit is used with an AC power adaptor, do not wrap the unit in a cloth, blanket, etc. If you do so, the temperature inside and outside the unit may rise considerably, resulting in malfunctioning of the unit or serious accidents. · If the unit is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the unit. [. . . ] PLAY/PAUSE BUTTON It release standby mode, playing starts from stop mode. SKIP/SEARCH BUTTON It activates skip to next track (or directory) and activates highspeed forward search. OPEN KNOB For opening the CD door. For the Customers in Canada This apparatus complies with the Class B limits for radio noise emissions set out in radio interference regulations. This product contains a low power laser device. CLASS 1 LASER PRODUCT APPAREIL À LASER DE CLASSE 1 PRODUCTO LASER DE CLASE 1 PRODUTO LASER CLASSE 1 DO NOT TOUCH THE LENS CAUTION: INVISIBLE LASER RADIATION WHEN OPEN AND INTER LOCKS DEFEATED AVOID EXPOSURE TO BEAM PRECAUTIONS On safety As the laser beam used in this compact disc player may be harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only. Do not put any foreign objects in the safety slot inside the disc compartment. If you do so, the laser beam may come out when the lid is opened. Do not put any foreign objects in the DC in 6V (external power input) jack. Should any solid objects or liquid fall into the unit, disconnect the power supply and have the unit checked by qualified personnel before operating it any further. On operation Since the CD system offers a wide dynamic range, the peaks of the high level inputs are recorded with high fidelity, and the noise level is very low. Do not turn up the volume while listening to a part of the disc with no audio signals or very low level inputs. If you do so, the speakers may be damaged when the peak level of the sound is played. The lens on the disc table should be kept clean. If you do so, the lens may be damaged and the unit will not operate properly. Notes: · The normal function of the product may be disturbed by interference and shows error message, just reconnect the power source for resume normal operation. · The CD player and adaptor shall not be exposed to dripping or splashing water and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Note: The key tone will be heard while pressing the function buttons. DISC PLAYING 1. Open the CD door with the " OPEN " knob. Insert the CD with the printed side facing upwards and push the disc gently until it clicks so that the disc fits into the pivot. Press the " " button to play. On display windows When you press " " , the display window shows: On installation Never install the unit where it would be subject to: - heat sources such as radiators or airducts. - uneven surface. During play The track number of the current selection appears. When " " is pressed during play, total number of tracks on the disc will be displayed and the unit is still on. The unit will return to full stop mode automatically after approximately 30 seconds if no button is pressed again. Or press " " button to stop the unit. During pause The current track will flash. [. . . ] Skipping of sound: · Dirty or defective disc. When using with batteries the battery life is short: · Use alkaline batteries and not manganese batteries. The unit can not be operated: · No disc , dirty disc or scratched disc. The unit will return to full stop mode after approx. [. . . ]