User manual AUDIOVOX CTX3200

[. . . ] TABLEOFCONTENTS FEATURES AND OPTIONS . 7 TELEPHONE UNIT FUNCTIONS . . . . . . . . . . . . . . . . . . . . . 8 BASIC OPERATION . . I6 r i J , Turning the Unit On To Store a Number in Memory To Recall a Number from Memory To Review the Prefix Last Number Review Display Own Telephone Number Repertory Memory Scroll Automatic Storing into a Vacant Memory Address Secret Memory To Lock the Unit Automatic Lock (NAM Option) To Unlock the Unit Backlighting On/Off Control Volume Control MEMORY NAME TAG . I4 To Enter Names using Alpha (Letters) To Store Name with Phone Number To Recall from Memory with Name ALPHA SEARCH . [. . . ] Press lftCLl , key q appear on the readout. When a call is received, the unit indicates it by flashing v/ on the readout without Alert Tone. This mode is deactivated by pressing m , key q then q again. If the Silent Incoming Calls is activated when the unit is powered up, I] will appear on the readout for 5 seconds. Call in Progress Protection Phone conversation will continue until call is terminated, even after ignition switch is turned off. ONETOUCH DIALING This feature permits you to place a call by a single key stroke. To Store a Number into One Touch Memory 1. Press /STO/ , then one of the three One Touch Keys. Stored numbers can be reviewed by pressing /RCY then the One Touch Key you want to review. Any Digit Key Answering (NAM Option) This feature permits you to answer an incoming call by pressing any of the digit keys on the keypad. Automatic Answering With this feature, the incoming call will be automatically connected for operation after two alert tones, and the -1 indicator will light on the readout. Then the unit is ready for Hands-free operation. To activate this mode, press jtUNCl and then key q . This mode is deactivated when IFUNC/ and then key q are pressed again. This feature will not function if the handset is off the cradle or if the unit is in the following modes: To Place a Call to a Number in One Touch Memory Press the One Touch Key for approx. The last 10 digits of the number will be displayed on the readout, and the -1 indicator will light as a call is placed. CALLRESTRICTIONS (NAM OPTION) This feature permits you to impose various kinds of restrictions on Outgoing Calls. To Set Call Restricted Mode Enter the three-digit security code, then press -1 , key i#l then q The following key operation is needed to activate one of the restricted modes: Only phone numbers having 11 digits or less are accepted. Operator assisted dialing is prohibited. Only phone numbers having 7 digits or less are accepted. Operator assisted dialing is prohibited. Operator assisted dialing (0 Origination) is prohibited. No phone calls can be placed except for repertory dialing from memory address 01 to 09. However, emergency call with "911" are available. However, emergency call with "911" are available. No restriction. Note: If you hear feedback on a bad RF Channel, adjust the hands-free loop attenuation as follows. 1) Press /FUNGI , key m then q Hands-free loop attenuation will be increased by 14 dH. Dress ' /FUNC/ , key q then q ' END-TO-END SIGNALING , . This feature permits you to utilize additional phone services, such as accessing an alternate long distance network, signaling a pager, or banking by phone etc. . [. . . ] Deactivate this mode if it is not being used Note(i): as this feature remains activated even if the power source is turned off. The power source is automatically turned Note@): off to prevent the discharge of the car battery when the safety timer expires. AUTOMATIC HORN ALERT (NAM OPTION) This feature, when wired to the vehicle, indicates the incoming call by sounding the horn or by flashing the lights. When on, the Automatic Horn Alert will automatically set each time that the car ignition is turned off. I] will appear on the display and the Automatic Horn Alert mode will be on. [. . . ]