User manual AUDIOVOX D2016

[. . . ] D2016 PORTABLE 10" LCD MONITOR AND DVD PLAYER Notice: 1. This Product incorporates copyright protection technology that is protected by method claims of certain U. S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. [. . . ] Press "display" 2nd time, "WIPE BOTTOM" will display on the screen, the picture will refresh from bottom to top. Press "display " 3rd time, "WIPE LEFT" will display on the screen, the picture will refresh from left side to right side. Press "display " 4th time, "WIPE RIGHT" will display on the screen, the picture will refresh from right side to left side. Press "display" 5th time, "DIAGONAL WIPE LEFT TOP" will display on the screen, the picture will refresh from left top to right bottom. Press " display " 6th time, "DIAGONAL WIPE RIGHT TOP" will display on the screen, the picture will refresh from right top to left bottom. Press "display " 7th time, "DIAGONAL WIPE LEFT BOTTOM" will display on the screen, the picture will refresh from left bottom to right top. h. Press "display " 8th time, "DIAGONAL WIPE RIGHT BOTTOM" will display on the screen, the picture will refresh from right bottom to left top. 16 M. Connecting to other Electronical Equipment 1. Connecting to a TV or another monitor ( Refer to Figure 4) a. Position the AV In/Out Switch to "Out" Position. Connect one end of the audio/video adapter cable's black 1/8" plug into the unit's AV jack. Using a standard A/V cable (not supplied), connect the other end to the AUDIO/VIDEO Input jacks on your TV or Monitor (white = left audio channel, red = right audio channel, yellow=video). NOT SUPPLIED Figure 4 2. Connecting to a Game or Camcorder (Refer to Figure 4) a. Position the AV In/Out Switch to "In" Position. Connect one end of the audio/video cable's black (1/8" plug) plug into the unit's AV jack using a standard A/V cable (not supplied), and connect the other end to the AUDIO/VIDEO output jacks on your Camcorder or game (white = left audio channel, red = right audio channel, yellow = video). Note: Please don't connect an AV signal source to the AV jack when the unit is in "AV Out" Mode. 17 3. Headphones Optional wired headphones may be used with the unit. Simply plug in the headset to either Headphone 1 jack or Headphone 2 jack on the right side of the DVD. ( Refer to Figure 5. ) * * Figure 5 Plugging into Headphone jack 1 disables the internal speakers. SD Card and Thumb Drive/Digital Cameras With no disc in the unit, insert either an SD card, Thumb Drive, or digital camera with JPEG or MP3 files into the appropriate input. The D2016 will automatically select the input in use. 1) Insert an SD Card into the SD Slot on the front of the unit. 2) Insert a Thumb Drive into the USB jack on the left side of the unit. 3) Connect the USB cable (not supplied) from a camera into the USB port on the left side of the unit. 18 N. [. . . ] · Some discs have sections that prohibit rapid scanning or title and chapter skip. · If you try to skip through the warning information and credits at the beginning of a movie, you won't be able to. This part of the movie is often programmed to prohibit skipping through it. No forward or reverse scan 25 Troubleshooting (Cont) PROBLEM IR sensor inoperative SOLUTION · Verify that the batteries in the remote are fresh. · Verify that the remote sensor eye is not obstructed. [. . . ]