User manual AUDIOVOX DVDVCP01

[. . . ] IN-CAR DVD-VIDEO PLAYER UserÕs Manual DVDVCP01 DVD DISC IN S SOURCE DISC EJECT PREV MENU ENTER NEXT VCP CST IN/A. RPT FULL AUTOMATIC CAR VIDEO SYSTEM DEW/HIFI VIDEO POWER/ STANDBY STOP REW PLAY/PAUSE FF TRACKING AV. SW EJECT L AUDIO R SPECIALLY DESIGNED FOR VAN, RV, MARINE, AND OTHER MOBILE APPLICATIONS This instrument is listed by UnderwriterÕs Laboratories, Inc. It is designed and manufactured to meet rigid U. L. safety standards against Xradiation, fire, casualty and electrical hazards. Audiovox Specialized Applications, LLC. , Elkhart, IN 46514 www. asaelectronics. com IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Connect AUDIO OUT in rear panel of DVDVideo to IN jack of stereo sound unit. 2 For Input Select in stereo unit, Select ÒExternal InputÓ connected with DVD-Video. 3 Playback DVD disc or Hi-Fi videotape, you can hear sound in speaker of stereo unit. REAR OF THIS PLAYER STEREO SOUND UNIT INSTALLATION AUDIO INPUT AUDIO 15 OUTPUT SELECT OUTPUT SELECT is used to display each output screen on the TV monitor by matching each screen with output source. WITH [AV. SW] BUTTON With [AV. SW] button, 4 output (AV1~4) mode can be set to VCP, DVD or AUX. VCP DVD AUX AV SWITCHING AV1 AV2 AV3 AV4 VCP VCP VCP VCP DVD DVD DVD DVD AUX AUX AUX AUX 1 Press [AV. SW] button, then the right screen will appear. 2 With [ ] buttons, go to desired source in green color. The source which is previously set will be appeared in yellow color. 3 Press [ENTER] button to select its source. The selected source will blink in yellow and green color. Move : . . . oe Select : ENTER End : AV. SW 4 Set each source using the same method. When the settings are done, press the [AV. SW] button. AV 1 AV 2 AV 3 AV 4 16 MODE CHANGE MODE CHANGE is used to select between VCP operation and DVD operation. WITH FRONT PANEL BUTTON By pressing [SOURCE] button on front panel, the buttons on the front panel or on the remote control activates according to the selected mode, DVD or VCP. WITH REMOTE BUTTONS NOTE If you donÕt select DVD in AV SWITCHING screen, DVD wonÕt be operated even if you insert the disc or the DVD lamp on the front panel is lighted by pressing DVD button. Also applicable to VCP. Press [DVD] button. If DVD mode is correctly selected, DVD lamp on the front panel is lighted. Then, front/remote button works as DVD function. Press [VCP] button. If VCP mode is correctly selected, VCP lamp on the front panel is lighted. Then, front/remote button works as VCP function. VIDEO PLAYER OPERATION 17 VIDEO PLAYER OPERATION BASIC PLAYBACK 1 Press [] button to power on. Press [VCP] button of remote control to change into VCP mode. 2 Insert the desired tape. 3 If you want to playback it, press [PLAY/PAUSE] button. When the operational status is flickering or poor, adjust it with [TRACKING +/-] button. 4 To stop it, press [s ] button. For pause, press [PLAY/PAUSE] button in playback mode. If you press this button once more, it starts playback again. 5 Press [EJECT] button to remove the tape. VARIOUS PLAYBACK METHODS ¥ If you want fast forward (or reverse) playback, press [] or [oeoe] button in Playback mode. You can watch fast playing (rewinding) screen. ¥ If you want Still picture, press [PLAY/PAUSE] in Playback mode. You can watch the desired screen in pause status. ¥ If you want slow-motion playback, press [] button in Pause mode. You can watch the desired screen in the slow forward playback. * NOTE: VCP doesnÕt have Slow Reverse Playback function. ¥ If you want to watch a series of screens one by one, (FRAME ADVANCE) press [NEXT ] button in Pause mode. Each time you press this button, the picture advances one frame. TO ADJUST DISPLAY NOTE If the product, which has an autodetector, detects that the tape playback heads are contaminated it will display a notice on the video screen. In the case of the notice on the screen, please clean the heads with a commercially available tape head cleaner, as described in ÒHow to use a head-cleanerÓ section on page 33. This product includes automatic Tracking functions and enables users to enjoy clear video playback without any additional operations. [. . . ] ¥ Switchable input device used between TV and VCP (game prep). ¥ Poor connection between VCP output and TV input. ¥ Shorted coax cable between VCP and TV. picture or lines on screen. ¥ Switch TV to video mode with remote control or switch behind control door of TV. [. . . ]