User manual AUDIOVOX FPE2006

[. . . ] To reduce the risk of electric shock, do not perform any servicing other than those contained in the operating instructions unless you are qualified to do so. POWER SUPPLY: Connect the supplied adapter to the rear of the unit in the jack marked "DC12V IN". Plug the two-prong end of the power cord to an AC100-240V outlet. If the unit will not be used for a long time, remove the plug from the outlet. [. . . ] Once the desired item has been selected, press the , buttons to scroll through the available options. Once the desired option has been located, press OK to save and exit from the menu. Language Press the , buttons to select the desired language. Reset Press the, buttons to restore the default settings. Caption Press the or button to select one of the available caption modes: CC1, CC2, CC3, CC4, T1, T2, T3, T4 and OFF. V-Chip Setting The V-Chip setting is a parental control rating function. Depending on the broadcaster, you can edit violence, language and explicit content. Use the , buttons to select the V-CHIP SETTING, press the button to enter, "PIN _ _ _ _" will be displayed on the lower portion of the screen, use the number buttons to enter your PIN. GENERAL LANGUAGE ENGLISH RESET CAPTION CC1 V-CHIP SETTING PIN: _ _ _ _ - 18 - TV Function Note: The default password is 3308. This password will always be effective even after you change the PIN. When you input the password, the following menu will be displayed: V-CHIP SETTING V-CHIP TV RATING MPAA RATING CHANGE PIN ON At this menu, use the, buttons to position the cursor over the item you want to set, use to enter the lower menu and reveal the selections allowed. Press the OK button to exit from the menu. V-Chip Use the or button to position the cursor over V-CHIP, use the button to set to ON or OFF. TV Rating Use the or button to position the cursor over TV RATING, press the button to enter the TV rating menu. Select RESET and press the , buttons to restore the default status. Select CAPTION V-CHIP SETTING, refer to the TV function paragraph which explains in greater detail about setting these items. - 22 - S-VIDEO Function S-VIDEO Function This unit is equipped with an S-Video connection, which will allow you to enjoy programs from external sources. external source After connecting an external AV signal such as a VCR, camcorder, game player etc. Press the source button on the remote control to select the S-Video input and start viewing the Picture Parameter setup Press the SCREEN SETUP button once on remote control to enter picture setup menu. The following menu will be displayed: PICTURE BRIGHT CONTRAST SATURATION HUE SHARPNESS 050 060 070 050 002 Use the , button to move cursor to the item you want to set (Bright, Contrast, Saturation, Hue and Sharpness). Use the , button to set the desired values. Press the "OK" button on the remote control and exit from the setup menu. General Setup Press the SCREEN SETUP button on the remote control three times to enter the general setup menu. Use the , button to highlight the item you want to change. Use the , button to set the selected item to desired mode of operation GENERAL LANGUAGE RESET ENGLISH NTSC-358 60Hz Select Language and press the , buttons to select desired language. Select RESET and press the , buttons to restore the default status. Select CAPTION V-CHIP SETTING, refer to the TV function paragraph which explains in greater detail about setting these items. - 23 - Computer Screen Function This unit's TFT LCD display may be used as your computer's monitor. [. . . ] An interactive menu will appear on the screen. Load Factory Select the item and press the OK button to reset all settings, it will return to the original status. Last Memory Use the UP/DOWN direction buttons ( return. ) to select On or Off. Press the OK button to confirm and - 33 - System Setup LCD Setup Menu Turn on the power of the unit and press the SOURCE button on the remote control or front panel to select DVD mode. Picture Parameter Setup Press the SCREEN SETUP button on the remote and the following screen will be displayed: Press the , button to highlight Bright, press the , button to adjust the desired value. PICTURE BRIGHT CONTRAST AUTO PHASE CLOCK H. POSITION V. POSITION 055 060 000 100 041 036 Bright: This setting allows the user to adjust the picture brightness to the desired level. [. . . ]