User manual AUDIOVOX FPE3205

[. . . ] Do not stare into beam. CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. POWER SUPPLY: Connect the supplied AC Power Cord to the side of the FPE3205 in the connector marked 110-220V-50/60Hz. Plug the three prong end of the power cord to an AC110-220V outlet. If the unit will not the used for a long time, disconnect the plug from the outlet. [. . . ] Press the Enter button again to confirm and return. Digital Audio Output Press the or button to select the Digital Audio Output then press the Enter button to select RAW or PCM. Once the desired setting is selected press or to exit. TV Speaker Press the or button to select TV Speaker then press the Enter button to select On or Off. Once the desired setting is selected press or to exit. Mode Press the or button to select Mode, press the Enter button to cycle through the available options: TRUBASS , BYPASS, WOW, TSXT. Once the desired setting is selected press or to exit. Settings Press the or button to select Settings then press the Enter button to have the unit restore all the factory settings for the current parameters shown on the screen. - 26 - System Setup and Operation (Continued) Selecting a Feature for Setup Press the Menu button to activate the main setup menu, as shown on the right: Press the or button to select the Feature then press the or button to enter the setup menu. Press the or button to select one of the features for setting. Press the or button again to return to the previous menu. Press the Exit button to exit the setup menu. Use the number buttons on the remote control to input the password, the default password is 0000. - 28 - System Setup and Operation (Continued) Parental Control Menu When the correct password is inputted, the parental control menu will be displayed on the screen, see the below figure: Fantasy violence [FV], adult languages [L], sexual situations [S], violent scenes [V] and suggestive dialogues [D] In the parental control menu, press the direction buttons to position the blue box at the desired MPAA or TV rating then press the Enter button to set the rating. Press the Exit button to exit the setup menu. Closed Caption Options Press the or button to select the Closed Caption Options then press the Enter button, see the figure to the right. Press the or direction buttons to select an items then press the Enter button to cycle through the allowable settings. Once the desired setting is visible, press the Exit button to exit. You can see a sample of the change at the bottom of the menu. In the AV1, AV2, AV3, AV4, VGA, HDMI mode, you can refer to the setups in the TV mode to set the items. - 29 - DVD Player Operation Disc Loading Steps: 1. Press the POWER button to turn on the power. Press the Input button and select DVD mode, press the Enter button to select DVD mode. Insert the disc with its printed side facing you into the disc tray. Disc will automatically be pulled into the disc player. While the disc is loading, "Loading" will appear on the liquid crystal display and playback will begin. Warning: Do not play poor quality discs that may damage the player. DVD Playback Region Code DVD players and discs are coded by region. [. . . ] Press the or direction buttons to select Parental 2. Press the Enter button to enter the setup mode, see the figure to the left: 3. Press the or direction buttons to select the rating level. Press the Enter button again to confirm setting and return. Default 1. [. . . ]