User manual AUDIOVOX FR142

[. . . ] 4 Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Automatic Channel Scan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 To Send Call Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 To Lock Control Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This transceiver is weather resistant but not waterproof. · Do not expose the transceiver to long periods of direct sunlight, nor place the transceiver close to heating appliances. · Do not place the transceiver in excessively dusty areas, humid areas, wet areas, nor on unstable surfaces. · If smoke or something unusual is coming from the transceiver, immediately switch OFF the power and remove the batteries from the transceiver. Contact your dealer. Display and Indicators LED display - indicates Channel numbers, Volume level, Lock, Beep, Low Battery Level, etc. Transmission and Receiption indicator - When transmitting, the indicator stays on. The indicator flashes when receiving a singal. Power Saver Mode indicator - flashes in Power Saver Mode. 1 UNPACKING Carefully unpack the transceiver. We recommend that you identify the items listed below before discarding the packing material. · Transceiver . . . . . . . 1 · Belt Clip . . . . . . . 1 Battery Installation 1a To Turn On The Unit or To Turn Off The Unit Press the POWER switch for more than 1 second. Auto Battery Power Saver The unit has a special circuit designed to extend battery life. If there are no transmissions within 3 seconds, the unit will automatically switch to battery save mode. The Power Saver Mode LED(Red) will flash. Low Battery Indicator When battery level becomes low, appears on the LED 1b 1c display and flashes. Replace all four batteries with new ones. To Transmit Simply talk to the built-in microphone and press the PTT(PushTo-Talk) button. 4 "AAA" alkaline batteries To Adjust VOLUME control Press momentarily UP button to increase or DOWN button to decrease volume. The higher number (16), the higher volume level. 1. 2. (a) Lift the tab of the belt clip while (b) pushing the clip up to remove it. (c) Pull lock tab down and lift door up (towards you) to remove battery cover. Position batteries according to polarity markings. Reverse the steps in "1" to re-assemble. To Select Main Channel 1. [. . . ] This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. [. . . ]