User manual AUDIOVOX GMRS120 Owners Manual

[. . . ] The PTT Button can also be used as a two-way call ringer. Pressing the button twice quickly will call another party on the same channel. The Transmit icon on the LCD will displayed for 3 seconds and then go out. Up Channel/Volume Button (10) In the standby mode, pressing this button will increment the listening volume. [. . . ] - Press and hold the PTT button (3) to transmit, then speak into the microphone clearly and slowly. - Communication can only be accomplished when the channel and CTCSS tone frequency of at least two parties are the same. Channel Selection In order to communicate with other GMRS/FRS units, both transmitting and receiving party must be on the same frequency. The GMRS120/120-2 has 22 channels (frequencies) (1-22) indicated by the large digits on the LCD display panel. Channels 1 through 7 are the shared GMRS/FRS channels. Channels 8-14 are FRS only channels, while channels 15-22 are assigned GMRS only channels. Communication with Audiovox GMRS/FRS and compatible units is possible on these 22 channels. To change the channel, - From GMRS/FRS standby mode, press the MODE button (9) until the channel number flashes. - Press the Up Button (10) briefly to move to the next higher main channel number. - Press the Down Button (11) briefly to move to the next lower main channel number. MODE VOX ( ON/OFF) NOTE: Refer to the appropriate section of this manual for detailed operating instructions for each mode. Controls: Power On/Off and SCAN (6) Button Press and hold the power on/off button ( ) for at least 2 seconds. You will hear a confirming melody to indicate the unit is on. To turn the unit off, press and hold the button for at least 2 seconds. Press this Button momentarily to enable or disable the scan mode. Adjusting the Volume (10, 11) With the unit powered on, press the Up Channel/Volume button ( ) to increase volume and the Down Channel/Volume button ( ) to decrease volume. The display will indicate the current volume level by the icon ( UL 0-7 ). VOX Selection Mode This option enables you to have hands-free conversation. Your voice or nearby sound is detected and the radio transmits without the need to press the PTT button. To set radio for VOX operation, -From GMRS/FRS standby mode, press and hold the MODE button until the VOX icon appears on the display. VOX can be turned off by pressing the MODE button for 3 seconds. Channel Scan Operation This feature allows you to monitor all channels automatically for valid signals. While scanning, you can transmit and receive. When a signal is received, the scan is interrupted and will return to scan mode 5 seconds after reception is terminated. NOTE: While the scan function is active, the MODE button will be inoperative. [. . . ] This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 30 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. [. . . ]