User manual AUDIOVOX JCD3050

[. . . ] Before you begin, turn off the vehicle ignition and disconnect the battery negative terminal. Remove the two screws from the top of the unit. Remove outer trim ring, and insert the supplied removal keys as far as they will go (notches facing up) into the slots at the middle left and right sides of the unit. Push tabs out to secure halfsleeve in the radio opening. [. . . ] When "BEEP ON/OFF" appears in the display, press SEL/MENU two times, then press VOL or VOL to select USA or European spacing. Press LOUD (7) for more than three seconds to reinforce the bass output. Press BAND again for more than three seconds to release this function. Use a ballpoint pen or other thin metal object to press the reset button (9) under the following circumstances: · If none of the function buttons work or if an error symbol appears in the display. Press BAND (10) to change between three FM bands and two AM bands. Press CHANNEL << (11a) or CHANNEL >> (11b) momentarily, and the unit will automatically tune to the next strong station. Press CHANNEL << or CHANNEL >> for more than three seconds to enter manual tuning mode. When "MANUAL" appears on the display, press CHANNEL << or CHANNEL >> to move the radio frequency up or down one step. To automatically select six strong stations and store them in the current band, select a band (if needed) and press AMS (13) for more than three seconds. Six strong stations are stored as presets, replacing any preset stations already stored in that band. The unit will pause for ten seconds at each preset station. Press AMS again to stop scanning when the desired station is reached. The unit will play each station for five seconds. Press CHANNEL << (18a) or CHANNEL >> (18b) momentarily to advance to the next or previous track on the CD. the selected track number will appear on the display. Press and hold CHANNEL << or CHANNEL >> to fast forward or fast reverse through the disc. CD play starts when the button is released. Press and hold SCN (19) for more than three seconds during disc play to play the first 10 seconds of each track on the current disc. Press SCN again to end the scan and play the selected track. Press and hold RPT (20) for more than three seconds during disc play to continuously repeat the selected track. Press and hold SHF (21) for more than three seconds during disc play to play all tracks on a CD in random, shuffled order. Refer to the owner's manual included with the CD changer for instructions on installing, loading and using the CD magazine. [. . . ] To obtain repair or replacement within the terms of this warranty, the end user should contact the O. Dated bill of sale, and serial number of the unit, and vin#), specification of defect(s), transportation prepaid, to an approved warranty station. This warranty does not extend to the elimination of externally generated static or noise, to the correction of antenna problems, to costs incurred for removal or reinstallation of the product, or to damage to any tapes, cd's, dvd's, speakers, accessories, or electrical systems. This warranty does not apply to any product or part thereof which, in the opinion of the Company, has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident. [. . . ]