User manual AUDIOVOX JE1907

[. . . ] REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. AVIS * SEE REAR OF UNIT FOR GRAPHIC SYMBOLS * The lightning flash with an arrowhead within a triangle alerts you to uninsulated dangerous voltage within the product's enclosure that could cause an electric shock. The exclamation point within a triangle alerts you to the presence of important operating, maintenance and servicing instructions in this user's manual. The symbol for Class II (Double lnsulation) PLACEMENT INFORMATION · Do not use this unit in places which are extremely hot, cold, dusty, or humid. · Do not restrict the air flow of this unit by placing it somewhere with poor air flow, by covering it with a cloth, or by placing it on bedding or carpeting. SAFETY INFORMATION · When connecting or disconnecting the AC cord, grip the plug and not the cord itself. Pulling the cord may damage it and create a hazard. [. . . ] Make sure you connect both audio and video from the same VCR/PVR to the same output (AV OUT). Note: Please refer to the user manual for the VCR/PVR for more information. Note: · After connection, please operate in TV/AV mode. · For the reason of copyright protection, the result copy may has bad picture and/or sound. - Connect to a camcorder Connect the right (red) and left (white) audio input from the camcorder to the right (red) and left (white) output on this unit (Audio cable not included). Connect the video (yellow) input from the camcorder to the video output on this unit (Video cable not included). Make sure you connect both audio and video from the same camcorder to the same output (AV OUT). Note: Please refer to the user manual for the camcorder for more information. Note: · After connection, please operate in TV/AV mode. · For the reason of copyright protection, the result copy may has bad picture and/or sound. 11 PLV36190CS1_IB_ENG_JEN. pmd 11 09/07/2007, 18:16 CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input. Connect the three video outputs (Y, Pb, Pr) from the source to the corresponding video inputs on this unit (Component video cable not included). Connect the right (red) and left (white) audio output from the source to the right (red) and left (white) input on this unit (Audio cable not included). Mount this unit according to the directions included with the mounting kit. Note: You must remove the base stand before mounting the unit on the wall. 14 PLV36190CS1_IB_ENG_JEN. pmd 14 09/07/2007, 18:16 USING HEADPHONES · Turn down the volume before connecting headphones to the unit, then adjust the volume to your desired level. · When headphones are connected, no sound will come from the front speakers. Note: · Avoid listening to sound at high levels for prolonged periods of time. This may be harmful to you and may cause hearing loss. UNIT OPERATION TURNING THE UNIT ON FOR THE FIRST TIME The first time for you turning on the unit, the unit will enter Virgin mode. You can easily follow up prompt message on screen to finish basic settings of the system. Press the ENTER button to proceed the Initial Setup. / button to select your OSD language, and press the 2. Use the / button to select your TV tuner source (Antenna or Cable), and press the button to the next step. Make sure RF aerial has been connected properly to TV ANTENNA input jack on the rear of button. The system will automatically start to scan and the system, press the ENTER or preset all available TV channels. [. . . ] Recommended for all children age 7 and above. Movie Ratings PG-13 R NC-17 X C C8+ G PG 14+ 18+ : GENERAL AUDIENCES, Suitable for all ages. : PARENTAL GUIDANCE SUGGESTED - Some material may not be suitable for children. : PARENTS STRONGLY CAUTIONED - Some material may be inappropriate for children under 13. [. . . ]