User manual AUDIOVOX JE2610

[. . . ] Before operating the unit, please read these instructions carefully. Retain this manual for future reference. Do not remove any WARNING stickers on the unit. You are advised to follow the instructions carefully when operating the unit. [. . . ] Remote Control Function : (When using the remote control, point it towards the IR sensor. ) 8 9 10 11 12 13 14 15 16 17 1 2 3 4 7 Battery Usage Caution: 1 2 3 4 5 6 10. IR STEREO TRANSMITTER : For Wireless Headphone 7 11 13 15 17 19 20 12 14 16 18 6 7 18 To prevent battery leakage which may result in bodily injury or damage to the remote : 1. Install all batteries correctly, and as marked on the remote control. Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc. ). Remove batteries when the remote is not used for a long time. 8 8 10 9 INPUT/OUTPUT : Note: 1. Some buttons on remote have two functions (for TV & DVD mode). When press the TV button, the remote will get into TV function mode, each time when press the TV function button, the LED will ash "RED" light. When in DVD Mode, each time when press the DVD function button, the LED will ash "GREEN" light. 2. Some of the buttons are designed for operate single disc DVD player, pls read the DVD manual to operate the DVD player. 11. 15. AV Out 1 : RCA Video Output AV Out 1 : RCA Left Audio Output AV Out 1 : RCA Right Audio Output VGA : VGA Input (Computer) S-Video (AV) In 1 : S-Video Input /Component Input 16. Second IR Transmitter Audio Input TV Mode: 1. AUTO PROGRAM : Channel Scanning 4. /5. /14. /16. / / / : Up, Down, Left, Right Button for setting 6. LED : TV Mode --- Red Flash : DVD Mode --- Green Flash 9. VOLUME (+/- ) : Volume Up/Volume Down 17. RECALL : Channel Return DVD Mode: NEXT TRACK ( ): Select Next Title/Chapter FR( ) : FAST Reverse Play DVD : DVD Mode Selected FF( ) : FAST Forward Play MENU : DVD Root Menu PREVIOUS TRACK ( ): Select Previous Title/Chapter 18. DVD Button : Buttons only for DVD use 4. INSTALLATION GUIDE: When Connecting to a TV Cable: 1. Plug the cable to the input socket on the unit. Connect the cable that comes along with the unit to the one you are using when needed. TV AVTENNA (photo. 2) Noted: When connect Component Video input, please set OSD (AV1 Select) to "CV" to view Component-Video source. Input (RCA) from other Equipment: Connect to the TV AV IN 2 socket. CATV CABLE Connecting to Other Equipment : 1. This unit is able to support various input setting. [. . . ] Do not exert force when cleaning the LCD monitor. Cleaning the Enclosure: PC Adjust Auto Image H-Position V- P o s i t i o n Phase Clock Exit NTSC H: 15. 7kHz V: 60. 2Hz PC Adjust Auto Image H-Position V- P o s i t i o n Phase Clock Exit No PC Yes Adjust Auto Image H-Position V- P o s i t i o n Phase Clock Exit 1. Use a soft, clean & dry cloth to gently wipe o the dust on the LCD monitor. Use a clean cloth dampened with water to wipe o the dirt. [. . . ]