User manual AUDIOVOX JHD1510

[. . . ] JHD1510 AM/FM/RBDS/WB/AUX-IN/iPod Ready/SIRIUS Ready Heavy Duty Radio Installation and Operation Manual JHD1510 CONTENTS System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The PA output level can be adjusted using the rotary volume encoder (1). With radio power off, the radio will wake up when PA mic is keyed to make an announcement. Radio will return to off state when PA mic is released. The following items can be adjusted: Liquid Crystal Display (LCD) The current frequency and activated functions are shown on the LCD panel (20). NOTE: LCD panels may take longer to respond when subjected to cold temperatures for an extended period of time. Press AS/PS (14) to scan stations stored in the current band. The unit will pause for 5 seconds at each preset station. Press AS/PS again to stop scanning when the desired station is reached. RBDS Operation This unit is equipped to display RBDS (Radio Broadcast Data Service) information when broadcast by the radio station. The following LCD indicators appear when data is received: · · · RBDS: The current radio station is broadcasting RBDS data. When a station broadcasting TA is received, the TA icon disappears and the 'Traffic' message displays on the LCD. When flashing, PTY search is in progress. 4 15 11 8 6 5 7 9 10 2 12 Select a Band Press the BAND/WB button (15) to change between three FM bands and two AM bands. Press and hold the BAND/WB button to access the Weatherband (WB). NOTE: Radio stations broadcasting RBDS may not be available in your listening area. Traffic Alert (TA) While in FM radio mode, press and hold the PTY/TA button (13) to activate Traffic Alert mode and search for a Traffic Alert in your area. From all other modes, press the PTY/TA button to begin the search. · · Radio Mode: If no TA information is being broadcast, the radio will return to the previously tuned station. All other Modes: If a Traffic Alert is being broadcast, playback of the current mode will be interrupted and the radio will switch to the FM station issuing the TA. Press the PTY/TA button again to exit TA mode. Manual Tuning Press the TUNE/SEEK >>| or |<< buttons (19, 18) to seek stations up/down step by step. Auto Seek Tuning Press and hold the TUNE/SEEK >>| or |<< buttons (19, 18) to automatically seek the next or previous strong station. NOTE: Seek tuning is not available for weather band channels. Use the up or down tuning buttons to manually select any of the seven available weather band channels. Preset Stations Six numbered preset buttons store and recall stations for each band. Store a Station Select a band (if needed), then select a station. Press and hold a preset button (5-10) for two seconds. The preset number will appear on the LCD. Recall a Station Select a band (if needed). [. . . ] Press the 1/>|| button (8) to play the selected Playlist, Artist, Album, Genre, or Song. NOTE: The iPod will continuously recharge when connected to the unit, as long as the vehicle ignition is turned on. Alternate Display Mode Press the DISP/SCROLL button (12) to change the display information between single and double line text display. 13 3 1 16 21 20 18 19 14 17 4 15 11 8 6 5 7 9 10 2 12 10 JHD1510 CARE AND MAINTENANCE · · · · · Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Keep the product away from dust and dirt, which can cause premature wear of parts. [. . . ]